POWER ACOUSTICS SONORISATION Wm 100 Jplug
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Couldn't load pickup availability
Information
Information
Manufacturer Information
Power Acoustics Sonorisation
https://www.sogetronic.fr
------------------------
Safety manager:
SOGETRONIC
Email:
Address:
The Compact UHF Wireless Microphone: "Plug-and-Play" Spirit for the Stage
UHF wireless systems have established themselves as a reliable solution to gain freedom of movement while maintaining transmission suited for the voice. This model follows this logic with a compact aluminum receiver in 6.35mm Jack format, designed to reduce bulk and speed up installation. With its frequency range of 600 MHz to 609 MHz and 16 channels, it aims for simple and efficient use, suitable for both rehearsals and performances where quick deployment matters.
Who is it for and for what uses? A direct, efficient, and mobile wireless system
This UHF wireless microphone is intended for singers, hosts, speakers, and musicians seeking a practical solution to move freely on stage, in rehearsal rooms, or during events. The receiver's 6.35mm Jack format is particularly suitable for setups where bulky boxes and extra cables are to be avoided. It is a relevant choice if you need a system that is quick to start while maintaining clear vocal reproduction and an output level reserve compatible with many microphone inputs.
Features and Key Points: UHF Stability, Readability, and Robustness
UHF Transmission with 16-Channel Selection
The presence of 16 channels allows adjusting the transmission according to the radio environment. This helps find a more comfortable operating frequency when multiple wireless devices are nearby or when the venue requires vigilance against interference. The digital frequency modulation contributes to coherent transmission and good voice intelligibility.
Audio Quality Designed for Voice
With a frequency response from 75 Hz to 18 kHz (+/-3 dB), this system broadly covers the useful spectrum for spoken and sung voices, prioritizing clear reproduction. The signal-to-noise ratio above 90 dB contributes to clean listening, while a distortion below 1.0% at 1 kHz helps maintain natural reproduction even during dynamic passages.
Aluminum Receiver and LED Display
The aluminum receiver enhances the feeling of robustness and adapts well to transport and handling constraints. The LED display allows monitoring operational information, useful both in rehearsal and performance situations when quick system status checks are needed.
Rechargeable Lithium Battery with 5V Charging
Powering via a lithium battery with a DC 5V charging port simplifies logistics: no need to multiply batteries, and charging integrates easily into a common accessory set. For optimal experience, plan a full charge before long sessions and keep a 5V charging option available during travel.
Technical specifications
| Category | Complete system | Finishing | Aluminum |
| Capsule | dynamic | ||
| Number of channels | 16 | Output level | 200 mV (+/-5 mV) |
| Frequency range | 600 MHz to 609 MHz | Display | LED |
| Modulation mode | digital frequency modulation | Receiver | aluminum |
| Pickup mode | moving coil type | Battery | lithium |
| Frequency response | 75 Hz to 18 kHz (+/-3 dB) | Charging | DC 5V (charging port) |
| Signal-to-noise ratio | above 90 dB | Dimensions | 30 x 19.5 x 6 cm |
| Distortion | below 1.0% at 1 kHz | Weight | 0.40 kg |
Questions frequently asked
Does the POWER ACOUSTICS WM 100 JPLUG plug directly into a jack input?
The compact aluminum receiver uses a 6.35 mm jack format to connect directly to a compatible input. Its output level is specified at 200 mV, with a tolerance of ±5 mV.
What is the frequency range of the wireless microphone?
The UHF transmission operates between 600 MHz and 609 MHz. Sixteen channels allow selecting an operating channel according to the radio environment.
Is this microphone suitable for singing and speaking?
Equipped with a dynamic moving coil capsule, this system features a frequency response of 75 Hz to 18 kHz (±3 dB). The signal-to-noise ratio is greater than 90 dB and distortion is below 1% at 1 kHz. These specifications correspond to a reproduction adapted for both sung and spoken voices.
How is the WM 100 JPLUG wireless system recharged?
Power is supplied by a lithium battery rechargeable via a 5 V DC port.
Is the receiver suitable for transport?
With a specified weight of 0.40 kg and dimensions of 30 x 19.5 x 6 cm, the unit remains compact. The receiver benefits from an aluminum construction and LED display to monitor its operation.
