Tone City PEDAL SUBSTATION, ALIMENTATION MULTI POWER SUPPLY
Estimated Shipping Widget will be displayed here!
Couldn't load pickup availability
Information
Information
Manufacturer Information
Tone City
https://www.tonecityaudio.com
info@tonecityaudio.com
------------------------
Safety manager:
HIGH TECH DISTRIBUTION
Email: pro@htd.fr
Address:
A Multi-Output Power Supply Designed for Stage and Studio
The Pedal Substation TPS-1 is a multi power supply designed for guitarists and bassists who want to ensure the reliability of their effects chain and simplify pedalboard setup. Thanks to its isolated outputs, it reduces ground loops and interference, helping to maintain a clear sound even with multiple pedals, digital delays, or reverbs. Its real daily strength lies in incident management: each output is individually protected, so a short circuit on one pedal does not interrupt power to the rest of the setup, and the red LED immediately indicates the affected line. The two variable 9V to 18V SAG outputs provide real adjustment range: lower the voltage for a softer attack and slight compression, or raise it to give more headroom to certain preamps, overdrives, and fuzz pedals. A robust, silent, and practical solution to centralize power supply and gain peace of mind on stage.
Technical specifications
| Current | 1 A |
| Voltage | 24 V |
| Category | Multiple power supply |
| Number of outputs | 10 |
| Input | DC 24V / 1A |
| Outputs | DC 9V / 500 mA x 4 |
| Protection | short circuit and overload, independent on each output |
| Fault indication | red LED per output (lights up in case of short circuit, turns off after correction) |
| Dimensions | 92 cm x 120 cm x 55 cm |
| Weight (without accessories) | 0.5 kg |
Questions frequently asked
How many outputs does this pedal power supply offer?
The power supply features a total of 10 outputs, including four DC 9 V outputs delivering 500 mA each.
Are the 9 V outputs isolated for a pedalboard?
Four DC 9 V / 500 mA outputs are specified, with isolated outputs to limit ground loops and interference. This design is especially suitable for effects chains that include digital delays or reverbs.
What happens in case of a short circuit on a pedal?
Each output has independent protection against short circuits and overloads. A fault on one pedal does not cut power to the other lines. A red LED indicates the affected output and turns off after the issue is resolved.
What are the SAG 9 V to 18 V outputs used for?
The two variable SAG outputs from 9 V to 18 V allow adjusting the voltage according to the effect used. Reduced voltage can soften the attack and add compression, while higher voltage increases the headroom of certain preamps, overdrives, and fuzz pedals.
What power adapter is needed for the Tone City Substation TPS-1?
The input requires a DC 24 V / 1 A power supply. The enclosure weighs 0.5 kg without accessories, with dimensions of 92 cm x 120 cm x 55 cm.
