- The Mackie Go system brings together the Thump GO (speaker), the ThumpSub GO (subwoofer), and the ProFX10Go (mixer) — all battery-powered.
- Build a truly 100% cable-free PA, with no power outlet anywhere in sight.
- Each unit delivers serious battery life: up to 12 hours for the speakers, 8 hours for the mixer.
- Bluetooth, USB-C, stereo pairing: everything stays simple and plug-and-play.
Back when we first started advising on PA systems, putting together a small off-grid rig was a real headache: external battery packs, power inverters, extension cords snaking everywhere. The Mackie Go system sweeps all that away. At an outdoor event last month, I had the whole thing up and running in five minutes, not a power outlet in sight. Mackie has built a coherent mobile range: the Thump GO for mains, the ThumpSub GO for low end, and the ProFX10Go for mixing. Three pieces, one unified concept, zero mains cables. Here’s why this portable PA changes the game — and how to combine these units depending on your gig.
Thump GO: the powered speaker that goes anywhere
The Thump GO is the most compact battery-powered speaker in the Thump line. Its 8-inch woofer and 200 W deliver punchy, clear sound that's true to the Mackie signature. The removable battery provides up to 12 hours of runtime — enough to cover a full day without ever touching a wall socket.
It features a built-in 2-channel mixer with two XLR/TRS combo inputs for mic, guitar, or keyboard. Bluetooth streaming and control via the Thump Connect 2 app let you dial in EQ and presets remotely.
Four voicing modes, an outdoor mode, Music Ducking, and a feedback eliminator: everything you need to keep your announcements clean and tailor the sound to your environment. Use it as a main speaker or as a stage monitor thanks to the 45-degree wedge cut — it adapts to every situation.
Specs – Mackie Thump GO
| Type | Battery-powered active speaker2-way |
|---|---|
| Power | 200 W · Class D amplifier |
| Drivers | 8-inch woofer · 1-inch compression driver |
| Frequency response | 57 Hz – 20 kHz · Max SPL 115 dB |
| Mixer & DSP | 2 digital channels · 4 voicings (Music / Voice / Monitor / Sub) · Music Ducking · feedback eliminator |
| Connections | 2 × XLR/TRS combo inputs XLR mix output Bluetooth |
| Battery life | Removable lithium-ion battery included · up to 12 hours |
| Mounting | 35 mm pole cup · 45° wedge for floor monitor use |
| Dimensions | 457 × 230 × 285 mm · 8 kg |
| Verdict | Strengths
Worth noting
|
The Thump GO is the heart of the system. On a stand or tilted at 45°, it handles a terrace, a bar, or a small stage with ease. Music Ducking automatically lowers the music when you grab the mic — perfect for an MC or DJ talking between tracks. You can also pair two Thump GO units in stereo for wider coverage.
The Thump GO’s outdoor mode compensates for the natural bass roll-off you get in open-air environments. Indoors, switch back to the standard mode to avoid an overly boomy low end.
ThumpSub GO: the subwoofer that locks in your low end
The ThumpSub GO is the active subwoofer in the range, built to add body and weight to your system. Its two 8-inch drivers and 400 W reach down to 32 Hz: kick and bass hits land with real impact, all without a bulky sub to lug around.
Like the rest of the system, it's built for endurance, with a dual battery bay: up to 6 hours with one battery, 12 hours with two, and hot-swap capability so you never have to cut the music mid-set.
On the control side, you get a sub volume knob, a phase invert switch, and a high-pass filter to blend the sub perfectly with your tops. Mono/stereo mode and two XLR outputs make it easy to build out a full system. The carry-case form factor and integrated handle keep it genuinely portable, despite the serious low end it delivers.
Specs – Mackie ThumpSub GO
| Type | Active subwoofer |
|---|---|
| Power | 400 W · 400 W peak power |
| Drivers | 2 × 8 inch |
| Frequency response | 32 Hz – 152 Hz · Max SPL 123 dB |
| Connections | 2 × XLR/TRS combo inputs 2 × XLR outputs Bluetooth |
| Controls | Volume · phase invert · high-pass filter · mono/stereo · Bluetooth pairing |
| Battery life | 2 battery slots · 6 h (1 battery) to 12 h (2 batteries) · hot-swap · 1 battery included |
| Mounting | 35 mm pole cup · M20 threaded insert |
| Dimensions | 535 × 250 × 560 mm · 18.9 kg |
| Verdict | Strengths
Worth noting
|
Without a sub, an 8-inch speaker quickly shows its limits on kick drum and bass lines. The ThumpSub GO fills that gap. Stack the Thump GO on the ThumpSub GO’s M20 threaded insert and you have a compact, clean, self-contained column system. The phase invert switch lets you align the sub’s low end with the speaker’s depending on your placement, giving you a tighter, more defined bottom end.
For longer gigs, slide a second battery into the sub. You can swap it out hot, without ever cutting the sound — perfect for a wedding reception or a DJ set that runs all night.
ProFX10Go: the portable mixer that runs the whole show
The ProFX10Go is the console that turns your speakers into a full PA system. In the tradition of the ProFXv3, it keeps Mackie's familiar ergonomics while cutting the cord: its rechargeable, swappable GB-10 battery delivers up to 8 hours of mixing and recording.
Its 4 Onyx preamps (up to 60 dB of gain) deliver clean, transparent sound, with 3-band EQ on every channel and 100 Hz high-pass filters. Channels 1 and 2 switch to Hi-Z for plugging in guitar or bass direct, with single-knob compression.
Bidirectional Bluetooth and the N-1 "Mix Minus" function are built for streaming and echo-free calls. The USB-C 2×4 interface at 24-bit/192 kHz and the GigFX+ effects engine with colour LCD screen make it the ideal tool for content creators and live performers alike.
Specs – Mackie ProFX10Go
| Type | 10-channel mixerUSB-C audio interface |
|---|---|
| Preamps | 4 Onyx preamps · up to 60 dB gain (channels 1–4) · Hi-Z on channels 1 and 2 |
| Processing | 3-band EQ (all channels) · 100 Hz high-pass filter · compression on channels 1 and 2 · GigFX+ effects · colour LCD screen |
| Wireless & calls | Bidirectional Bluetooth · N-1 “Mix Minus” function · phantom power |
| Audio interface | USB-C 2×4 · 24-bit/192 kHz · Standard, Loopback, Interface modes · Waveform OEM software |
| Connections | 4 mic inputs 8 line inputs XLR + TRS outputs |
| Battery life | GB-10 battery included · up to 8 hours · charges via mains or externally |
| Build | Steel “Built-Like-A-Tank” chassis · ABS corner protectors |
| Dimensions | 97 × 269 × 292 mm · 2.7 kg |
| Verdict | Strengths
Worth noting
|
The ProFX10Go significantly expands what the system can do. Where the Thump GO tops out at 2 channels, this mixer handles 10. You can connect multiple mics, instruments, a laptop, and route everything to your speakers. For a band, a podcast, or a multi-camera live stream, this is the unit that holds the whole performance together.
How to build your Mackie Go system for any gig
The beauty of a modular portable PA is that you only bring what you need. Here are three typical configurations:
- Ultra-light setup: a single Thump GO. Perfect for a conference, a fitness class, or speech-only events.
- DJ / party setup: Thump GO + ThumpSub GO. The low end comes alive — ideal for getting a terrace crowd moving.
- Full live setup: ProFX10Go + two Thump GO units + ThumpSub GO. You can run a full band in stereo, with monitors and USB recording.
Artists who rely on mobile rigs are everywhere. Think of an acoustic duo like Angus & Julia Stone doing a showcase, or an outdoor DJ set in the style of Folamour: this kind of system is built exactly for those situations where mobility comes first.
Start with the Thump GO, then add the subwoofer and the mixer as your needs grow. The Go ecosystem is consistent: everything shares the same batteries, the same apps, and the same compact form factor.
FAQ – Mackie Go portable PA system
Are the three Mackie Go units sold as a bundle?
No, the Thump GO, the ThumpSub GO, and the ProFX10Go are sold separately. You build your system piece by piece to suit your needs, starting with the speaker and adding the sub and mixer as you go.
Can the entire Mackie Go system run without a power outlet?
Yes. Every unit runs on battery: up to 12 hours for the Thump GO and ThumpSub GO, up to 8 hours for the ProFX10Go. You can build a complete PA with absolutely no access to mains power.
How do I connect the ThumpSub GO to the Thump GO?
The sub has two XLR outputs to feed one or two Thump GO speakers. You can also sit the speaker directly on the sub’s 35 mm pole cup to save floor space.
Is the Mackie Go system a good fit for content creators?
Absolutely, especially thanks to the ProFX10Go. Its 24-bit/192 kHz USB-C interface, Loopback mode, and N-1 “Mix Minus” function are purpose-built for streaming, podcasting, and echo-free calls.
What’s the best setup for a mobile DJ?
For a DJ set, the Thump GO + ThumpSub GO combination is the sweet spot: you get solid low end and clear mains coverage. Add a second Thump GO to go stereo for larger spaces.
A portable PA that grows with you
The Mackie Go system ticks every box that matters in the field: battery life, easy transport, and sound quality you’d expect from the brand. You can start small and scale up as your gigs demand it. And when your needs outgrow the Go range, Mackie’s classic mains-powered Thump line is ready to take over for bigger venues. Now it’s up to you to build the system that follows your music everywhere.
