AEA N22 Nuvo Stereo Set
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Essential Information About the AEA N22 Active Ribbon Microphone
Essential Information About the AEA N22 Active Ribbon Microphone
- "Big Ribbon" ribbon sound designed for close miking, warm and detailed without heavy equalization.
- Active JFET electronics with 48 V phantom power and premium transformer to work with most preamps and interfaces.
- Figure-eight polar pattern, reduced proximity effect, and excellent side rejection for creative placement in studio and live settings.
- Ribbon protected for vocals and stage use, high SPL handling (up to 141 dB), and handcrafted in the USA.
Manufacturer Information
AEA
https://aearibbonmics.com
info@ribbonmics.com
------------------------
Safety manager:
Woodbrass.com
Email: support@woodbrass.com
Address:
A Modern Ribbon Honoring AEA's Legacy
Designed with musicians in mind first and foremost, the AEA N22 bridges the gap between the "vintage" aesthetic of classic ribbons and the modern demands of today's studios. Its "Big Ribbon" technology delivers a broad and natural signature while remaining precise and easy to integrate into contemporary mixes. Positioned as a versatile tool, it prioritizes musicality over measurement, with a sonic consistency that defines its reputation.
For Songwriters, Engineers, and Demanding Home Studios
The N22 excels at close distance on vocals, acoustic and electric guitars, light percussion, and even kick drum. Its active electronics ensure a comfortable output level and immediate compatibility with consumer USB/Thunderbolt interfaces, without requiring high-gain preamps. On stage, its robustness and side rejection help control bleed while maintaining an organic tone.
Key Features for Natural and Controlled Recordings
Active JFET Electronics
The 48 V powered JFET preamp stabilizes the impedance seen by the ribbon, broadens compatibility with preamps, and improves tonal consistency depending on load. The result: a cleaner signal, usable without complex post-processing.
Designed for Close Miking
The voicing reduces proximity effect, delivering controlled lows just centimeters from the source. Singers benefit from an expressive ribbon tone, often without additional pop filters thanks to the ribbon's mechanical protection.
Figure-Eight Polar Pattern
The figure-eight pattern captures the source and rear ambiance while effectively rejecting the sides. Ideal for isolating an amp in the studio, recording simultaneous voice/guitar, or highlighting a room's acoustics.
Technical specifications
| Frequency response - start | 20 Hz | Capsule | ribbon dynamic |
| Frequency response - end | 20 kHz | Connection | XLR |
| Category | studio microphone | Color | Grey |
| Directivity | bidirectional | ||
| Type | Pair of active ribbon microphones | Output Impedance | 92 ohms |
| Polar Pattern | Figure-eight | Power Required | 48 V phantom power |
| Frequency Response | 20 - 20,000 Hz | Dimensions (H x Ø) | 225 x 41 mm |
| Maximum Sound Pressure Level | 141 dB SPL (1% THD > 1 kHz) | Weight | 335 g |
| Sensitivity | 8.3 mV/Pa at 1 kHz | Included Accessories | microphone mount, protective pouch, and carrying case |
You will also like
AEA
N8 Nuvo Stereo Set
Royer Labs
R-121 MP
AEA
R88A
Royer Labs
R-122 MKII MP
Royer Labs
R-122V
Coles
4038 MP
AEA
R88
AEA
R44C
Questions frequently asked
Does the AEA N22 Nuvo Stereo Set require phantom power?
The active JFET electronics require 48 V phantom power. The XLR output and 92-ohm impedance ensure compatibility with preamps and audio interfaces that provide this power.
Is this ribbon microphone suitable for close vocal recording?
The voicing is designed to reduce the proximity effect during close-miking. The mechanical protection of the ribbon often allows vocal recording without an additional pop filter.
What is the polar pattern of the microphones?
The figure-8 bidirectional pattern picks up sound from the front and rear of the microphone while rejecting side sounds. This configuration allows isolating an amplifier or capturing acoustics located behind the source.
Can this pair of ribbons be used on a kick drum?
With a maximum sound pressure level of 141 dB SPL at 1% THD above 1 kHz, this pair can be used on a kick drum. It is also designed for guitars, light percussion, and vocals.
What accessories are included with the set?
Each set includes microphone mounts, protective covers, and a carrying case.
