Aiaiai UNIT-4 SET WHITE
Estimated Shipping Widget will be displayed here!
40 - 100
W
USB PD
- This item is covered for 3 years
What you need to know
What you need to know
- Truly portable monitoring: two battery-powered active speakers, with more than 20 hours of playback time and a semi-rigid carrying case included.
- Precise listening: 2-way design, 4-inch woofer and 1-inch silk-dome tweeter.
- Three ways to connect: uncompressed W+ Link connection with the X04 transmitter, Bluetooth 5.2 or wired audio inputs.
- Built to last: main components made from 100% post-consumer recycled plastic, glue-free disassembly and replaceable components.
Manufacturer Information
Aiaiai
https://www.aiaiai.audio
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
The UNIT-4 V2 format: monitoring breaks free from the desk
This pair of white UNIT-4 V2 speakers combines the form factor of a compact studio monitor with the freedom of a battery-powered system. Each speaker has a volume of just 3 litres and weighs 2.5 kg. The set can therefore fit into a temporary creative space, a small studio or a mobile DJ setup, without requiring a permanent listening position.
This configuration includes a semi-rigid carrying case for the pair. It complements a design already intended for mobility: the rear port also serves as a handle, while a removable steel grille protects the loudspeakers.
For producing, preparing sets and listening attentively
The UNIT-4 V2 speakers are aimed at musicians, producers and DJs who want nearfield monitoring in different locations. They allow users to work on a composition, prepare a music selection or listen to the details of a track without constantly relying on a mains outlet. Their battery life of over 20 hours of playback makes long sessions and changes of location easier.
For music creation, the W+ Link connection prioritises low-latency, uncompressed transmission. For everyday listening from a compatible device, Bluetooth provides a direct connection. Wired inputs remain available for connecting a mixing top, an audio interface or another suitable source.
Studio-quality reproduction in a portable system
Two-way design for clear signal reproduction
Each active speaker combines a 4-inch high-excursion bass loudspeaker with a 1-inch silk-dome tweeter. The stated frequency response extends from 50 Hz to 20 kHz with a tolerance of plus or minus 2 dB. This tonal consistency provides a useful reference for examining the balance between the low, mid and high frequencies.
The bass port and amplifier EQ are tuned to extend bass reproduction down to 40 Hz. This extension differs from the stated range at plus or minus 2 dB: it adds extra foundation in the lower end of the spectrum while retaining a compact cabinet.
W+ Link, Bluetooth and cables: the right connection for every session
With the battery-powered X04 transmitter, W+ Link technology transmits a 16-bit/44.1 kHz uncompressed wireless audio signal with a stated latency of 16 ms. This connection helps minimise cabling between the source and the speakers during creative sessions.
Bluetooth 5.2 takes over for streaming music from a compatible device. For a wired setup, the UNIT-4 V2 features 3.5 mm mini-jack inputs and balanced 6.35 mm TRS jack inputs. You can therefore choose your connection method according to the available source and your way of working.
A modular design, down to the essential components
The main plastic components are made from entirely recycled material sourced from post-consumer waste. The speaker can be disassembled without glue using two screwdrivers, allowing worn parts—including the battery and loudspeakers—to be replaced. The wireless electronics are also designed to evolve: an approach that gives reparability a practical role.
Technical specifications
| Battery | Yes | Speaker diameter | 4" |
| Battery life | 20 MINUTE | Number of speakers | 2 |
| Frequency response - start | 50 Hz | Tweeter | 1" |
| Frequency response - end | 20 kHz | DSP | Yes |
| Category | monitoring | EQ | 5 channels |
| Type | active speaker | Cut-off frequency | 3 kHz |
| Number of channels | 2 channels | Cutaway | Yes |
| Amplification | Active amplified | SPL Max / peak | 105 dB |
| Auto-standby | Yes | SPL max | 105 dB |
| Bluetooth | Yes | Transport | 1 handle |
| Connection | mini Jack 3.5, USB, Jack 6,35 mm | Color | Black |
| External control | Application | Power output | 80 W |
| Model | UNIT-4 V2 | Bluetooth version | 5.2 |
| Package configuration | pair of speakers | Mini-jack input | 3.5 mm |
| Finishing | white | Jack input | 6.35 mm balanced TRS Jack |
| Acoustic architecture | 2-way | Speaker power supply | integrated replaceable battery |
| Woofer loudspeaker | 4 inches, long excursion | Playback time | more than 20 hours |
| Frequency response | 50 Hz to 20 kHz, with a tolerance of plus or minus 2 dB | Volume per speaker | 3 litres |
| Bass extension | down to 40 Hz | Weight per speaker | 2.5 kg |
| Bass adjustment | port and amplifier EQ | Carrying handle | integrated into the rear port |
| Port position | rear | Protective grille | steel, removable, covering the woofer loudspeaker and tweeter |
| Dedicated wireless link | W+ Link, with X04 transmitter | Material of the main plastic components | 100% recycled plastic from post-consumer sources |
| X04 transmitter power supply | battery | Assembly | can be disassembled without glue |
| W+ Link transmission | uncompressed audio | Disassembly tools | two screwdrivers |
| W+ Link resolution | 16 bits | Replaceable components | including the battery and loudspeakers |
| W+ Link sampling rate | 44.1 kHz | Wireless electronics | upgradeable |
| W+ Link latency | 16 ms | ||




