Algam Lighting Extension DMX IP65 10 Mètres
Estimated Shipping Widget will be displayed here!
Couldn't load pickup availability
Information
Information
Manufacturer Information
Algam Lighting
https://www.algam.net
contact@algam.net
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
Essential Information About the 10-Meter IP65 DMX Extension Cable
- DMX Extension Cable designed to transmit a stable control signal between a lighting console, spotlights, moving heads, LED bars, or power blocks.
- 10-meter length convenient for connecting two distant devices without increasing the number of joints on stage or in fixed installations.
- Male XLR and Female XLR connectors for easy integration into a standard DMX chain.
- IP65 protection suitable for demanding environments, offering enhanced resistance to dust and water splashes.
Technical specifications
| Connectors | XLR male | Category | Extension cable |
| Type of use | Event, Stage | Format | straight |
| Ground | No | Color | Black |
| From connectivity | XLR 3-pin male | Index of protection (IP) | IP65 |
| Towards connectivity | XLR 3-pin female | Length (m) | 10 m |
| To solder | No | ||
Questions frequently asked
What type of connector is used on this DMX extension cable?
The connection uses a 3-pin male XLR on one end and a 3-pin female XLR on the other, both with a straight design.
Is the 10 m IP65 DMX extension suitable for outdoor lighting installations?
Its IP65 rating means it is resistant to dust and water splashes. It is suitable for demanding environments where these conditions are present.
Is 10 meters enough to connect distant lighting fixtures?
With a length of 10 m, this extension allows spacing between two devices within a DMX chain. It can connect a lighting console to a fixture or extend a line between devices. This length reduces the need for additional junctions.
Can this cable be used with a console and DMX moving heads?
This extension transmits DMX control data between a lighting console and devices such as moving heads, fixtures, LED bars, or power supplies.
Is it necessary to solder the connectors on this extension cable?
No soldering is required: the male and female XLR connectors are already installed on the 10 m black cable.
