Cioks Flex 8800 Parallel current doubler 10cm
Estimated Shipping Widget will be displayed here!
What you need to know
What you need to know
- Combines the current (in mA) from two outputs of a CIOKS power supply to power a more demanding pedal.
- The voltage does not add up: two 9V outputs remain at 9V (e.g. 2 x 9V / 200mA = 9V / 400mA).
- Essential in a CIOKS Flex setup: no connector on this cable plugs directly into the pedal.
- Ultra-short format (10 cm) for clean wiring without excess on the pedalboard.
Manufacturer Information
Cioks
https://www.cioks.com
info@cioks.com
------------------------
Safety manager:
Filling Distribution
Email:
Address:
An Accessory Designed for the CIOKS Flex Ecosystem
Specifically designed for CIOKS power supplies, this adapter integrates into the Flex cable system to extend the power supply options for your pedalboard. It allows you to use two outputs in parallel to increase the available current reserve without changing the supplied voltage.
Who Is It For and What Is It Used For?
This adapter is ideal if you use a digital pedal, a multi-effects unit, or any effect requiring more current than a single output can provide. It is aimed at musicians who want to secure their power supply (comfortable current margin) while maintaining a compact and organized setup.
Operating Principle: Addition of mA, Not Volts
The cable puts two outputs of your CIOKS power supply in parallel to combine their maximum currents. The rule is simple: the voltage remains the same as that of the outputs used, while the available current increases. Example: connected to two 9V outputs each capable of supplying 200mA, you get a power supply of 9V / 400mA.
Important: Flex Cable to Pedal Required
Note: no connector on this adapter is intended to plug directly into a pedal. To actually power your effect, you absolutely need another standard CIOKS Flex cable with the connector adapted to your pedal's power input.
Technical specifications
| Compatible with | CIOKS power supplies | Note | no connector plugs directly into a pedal |
| Operation | specific to the CIOKS Flex cable system | Required | use with a standard CIOKS Flex cable adapted to the pedal |
| Type | current combiner adapter (addition of mA) | Length | 10 cm |
| Voltage | does not add (voltage remains the same as the outputs used) | ||
You will also like
Rockboard
Flat Daisy Chain Cable DC2-a
Voodoo Lab
PPBAR-RS12 - 30 CM SL
EBS
Flat Power Cable DC1-48 90/90
Cioks
Flex 1015 DC Plug 15cm
Rockboard
Y Power Ace cable - White
Cioks
FLEX TYPE 3 - 3050 LINE6 NEGATIVE DC PLUG 2,5MM - 50CM
Cioks
Flex 1030 DC Plug 30cm
EBS
DC1-38-909090 ELECTRICAL CONNECTORS ANGLED - 38 CM
Questions frequently asked
Can the CIOKS Flex 8800 power a pedal directly?
None of its connectors plug directly into a pedal. A standard CIOKS Flex cable with the appropriate plug for the effectâs input is required at the adapterâs output.
What voltage is obtained with two 9 V outputs?
The voltage remains at 9 V when two 9 V outputs are connected in parallel. Only the available current adds up.
How to double the current of a CIOKS power supply?
Two outputs of the CIOKS power supply can be connected to the combiner to combine their maximum currents. With two outputs of 200 mA at 9 V, the available current reaches 400 mA at 9 V. Both outputs used must have the same voltage.
Is this cable compatible with all pedalboard power supplies?
Compatibility is specifically designed for CIOKS power supplies using the Flex cable system.
What is the length of the CIOKS Flex 8800 parallel cable?
Its length is 10 cm, allowing a compact connection between two CIOKS outputs and a Flex cable going to the pedal.
