CopperSound Transistor Pack
Estimated Shipping Widget will be displayed here!
Essential Information About the Coppersound Transistor Pack
Essential Information About the Coppersound Transistor Pack
- Ideal Selection for DIY : a versatile assortment of transistors for prototyping and breadboard testing.
- Perfect for Effects Pedals : designed for easy experimentation on overdrive, boost, treble boost, and fuzz circuits.
- Ready-to-Use Pack : one of each reference, to quickly compare different sonic behaviors and gain responses.
- Compatible with Coppersound Kits : recommended for Single Transistor Overdrive, LPB1-Boost-A-Drive-A-Fuzz, Treble Boost, and Silicon Fuzz projects.
Manufacturer Information
CopperSound
------------------------
Safety manager:
Filling Distribution
Email:
Address:
A Pack Designed for Experimentation Around Transistor Circuits
The Coppersound Transistor Pack was created as a simple and effective base to explore the role of the transistor in effects pedals. In DIY, a simple change of transistor type can alter gain level, dynamics, perceived background noise, and how the circuit "saturates." This pack allows you to go from testing to listening in minutes, without multiplying individual component purchases.
Who Is This Transistor Pack For?
This pack is aimed at audio tinkerers, pedal enthusiasts, makers, and electronics hobbyists who want to prototype on breadboard or refine a build before soldering. It is also very suitable if you are following a kit or schematic for boost/overdrive/fuzz and want to compare several options to find the sonic character and gain reserve that match your playing style (attack, sustain, clarity, grain).
Complementary References to Vary Gain, Headroom, and Character
This pack includes five common transistors useful for covering several design approaches: versatile signal transistors, options more oriented towards "high gain," and references often chosen for their behavior in simple amplification stages.
Rapid Prototyping on Breadboard
On a breadboard, you can replace a transistor in seconds and observe the impact on the circuit: output level, compression, earlier or later saturation, noise, and overall balance. This approach is particularly practical on schematics inspired by the LPB-1, treble boosts, or silicon fuzz, where the transistor plays a central role in the sound's personality.
Optimized for Coppersound Kits
The contents are specifically indicated as "perfect" for testing different transistors in the Single Transistor Overdrive, LPB1-Boost-A-Drive-A-Fuzz, Treble Boost, and Silicon Fuzz kits. You save time during assembly and have a small consistent "test bench" for your build variants.
Technical specifications
| Fictitious load | No | Type | Others |
| IR loader | No | Headphone outputs | No |
| Category | amp accessory | Color | Transparent |
| Suitable for kits | Single Transistor Overdrive, LPB1-Boost-A-Drive-A-Fuzz, Treble Boost, Silicon Fuzz | Pack contents (1 of each) | 2N2222A, BC547B, BC550B, MPSA13, MPSA42 |
| Uses | transistor testing, prototyping, experimentation with boost, overdrive and fuzz circuits | ||
You will also like
CopperSound
Pre-Cut Stripped Wire 1,5 - Green
CopperSound
Pre-Cut Stripped Wire 2 - Yellow
CopperSound
DPDT (On-Off-On) Toggle
CopperSound
Pre-Cut Stripped Wire 2 - White
CopperSound
Pre-Cut Stripped Wire 1,5 - Blue
Dunlop
LARGE ROTARY KNOB WITH LOCKING SCREW
Fender
Control Snapin 50K 15a Taper
Fender
25K B taper snap-in style potentiometer
Questions frequently asked
Which Coppersound kits are compatible with this pack?
The pack is intended for Single Transistor Overdrive kits, LPB1-Boost-A-Drive-A-Fuzz, Treble Boost, and Silicon Fuzz. It allows comparison of different transistor models before soldering.
Does the CopperSound Transistor Pack allow testing a silicon fuzz?
The five included transistors are designed for experimentation in silicon fuzz circuits, as well as in boost and overdrive effects. Replacing them on a breadboard enables observation of changes in saturation and background noise.
Can these transistors be used on a breadboard?
The pack is suitable for prototyping on a breadboard, where a transistor can be quickly swapped. Testing allows control over output level, compression, and circuit balance. This approach particularly applies to circuits inspired by the LPB-1 and treble boosts.
Which sound parameters change depending on the chosen transistor?
Depending on the installed transistor model, gain, dynamics, perceived noise, and saturation behavior can vary. The five references in the pack cover approaches from standard current signals to higher gain.
Does this pack include a dummy load or headphone output?
No dummy load, IR loader function, or headphone output is integrated into this prototyping accessory.
