Cymbal Crown CCB6 - CYMBAL TILTER FOR 6MM THREAD
Estimated Shipping Widget will be displayed here!
The essentials to know about the Cymbal Crown
The essentials to know about the Cymbal Crown
- Ultra-fast setup and removal: install the cymbal in one movement, with no wing nut to screw on.
- Enhanced protection: rubber coating and a design engineered to eliminate metal-to-metal contact.
- More open sound: the cymbal retains a high degree of freedom of movement for a more natural response.
- Wide compatibility: fits most cymbal stands, thanks to the choice of 6 mm or 8 mm threading.
Manufacturer Information
Cymbal Crown
------------------------
Safety manager:
VBV International
Email: info@vbvinternational.com
Address:
Historical context and position within the range
The Cymbal Crown is part of the family of hardware accessories designed to optimize both practicality and equipment preservation. Whereas a traditional setup requires a wingnut, felts and washers, this minimalist system is designed to simplify the drummer’s routine, particularly during rehearsals, concerts or frequent configuration changes.
Who this drum kit/Cymbal Crown is for
The Cymbal Crown is aimed at both beginners and experienced drummers who want to save time during setup while protecting their cymbals. It is particularly well suited to styles where the kit is frequently handled (rock, pop, funk, metal, jazz, contemporary music), as well as to backliners, music schools and all musicians who move from soundchecks to stages with a need for reliability and speed.
Technical specifications
| Type of threading | M6 | Material | plastic |
| Use | Cymbal | Color | Black |
| Felts | can be added as desired | Step 2 | screw the Cymbal Crown onto the stand all the way, without forcing it to avoid damaging the thread |
| Step 1 | remove the wing nut, felts and metal washer from the stand | Step 4 | add felts if needed |
You will also like
Gibraltar
SC-4980J CUP SEAT HI-HAT
PDP By DW
SC-19A Tilter Base Protectors (set of 2)
Cymbal Crown
CCB8 - CYMBAL TILTER FOR 8MM THREAD
Tama
CB8P - PACK 2X EMBASE CYMBALE NYLON - POUR STAND STAR
Gibraltar
PRO HI-HAT CLUTCH - 4420
Pearl
NP208 - RUBBER CUP WHASHER FOR HI-HAT STAND (X3)
Pearl
FLW-003 - FELT FOR HI-HAT BASE
Sparedrum
HHR7-50 - HI HAT ROD 7MM 50CM (19 1/2")
Questions frequently asked
Is the Cymbal Crown CCB6 compatible with an M6 cymbal stand?
The M6 threading is designed for cymbal stands equipped with a threaded rod of this size.
Should felt washers be kept with this cymbal tilter?
The polymer body covered with rubber allows the cymbal to be placed without mandatory felts. Felts can however be added depending on the desired feel and control.
How to install this clamp system on a stand?
The wing nut, felts, and metal washer must first be removed. The tilter is then screwed all the way onto the M6 stand without forcing in order to preserve the threading. The cymbal can then be installed or removed by squeezing the end.
Can this tilter protect a cymbal from mounting marks?
Its rubber coating limits contact with metal parts and helps reduce the risk of marks at the support point.
What effect does this mounting have on the cymbal’s behavior?
The absence of wing nut tightening promotes a more natural freedom of movement. The cymbal can thus exhibit a smoother response and less hindered vibration.
