FBT X-Lite 115
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Couldn't load pickup availability
Information
Information
Manufacturer Information
FBT
https://www.fbt.it
------------------------
Safety manager:
MSC Distribution
Email: infos@msc-distribution.com
Address:
FBT X-Lite: a "light and efficient" approach within the range
The FBT X-Lite 115 follows a clear logic: to offer a high-performance passive speaker that is easy to handle and install while maintaining the sonic identity and build quality of an Italian brand. The choice of an injected polypropylene enclosure and a 2-way 15-inch architecture aims for a sought-after balance in sound reinforcement: presence in the low-midrange, fullness in the bass, and controlled projection to cover a listening area effortlessly.
In a live setup, a multipurpose room, or a fixed installation, this speaker positions itself as an "all-terrain" solution: powerful enough to be paired with a suitable amplifier, and flexible enough to be used on stands, front of house, suspended/mounted, or as a floor stage monitor.
Intended Uses and Target Profiles
The X-Lite 115 is aimed at musicians, DJs, service providers, and venues (bars, halls, associations, communities) seeking a simple, reliable, and coherent passive speaker for various scenarios. Thanks to its 15-inch configuration, it is particularly well-suited for vocals, keyboards, acoustic guitar, DJ tracks, and applications requiring "body" without immediately relying on a subwoofer.
It is also suitable for installations prioritizing modularity: a pair for front of house, additional units for monitors, or distributed sound reinforcement. Its nominal impedance of 8 ohms facilitates pairing with many power amplifiers, and the recommended filtering helps optimize bass control and clarity depending on your setup.
Design, Performance, and Implementation: Key Points for Optimal Use
Controlled Dispersion for Even Coverage
With a specified dispersion of 90 degrees horizontal by 60 degrees vertical, the X-Lite 115 is designed to project sound clearly towards the audience while limiting unnecessary spill. This type of directivity helps improve intelligibility, especially for vocals, and maintains a more consistent balance when moving around the listening area.
High Efficiency to "Do More" with Less
Its sensitivity of 98 dB (1 W / 1 m) indicates an efficient speaker: at equal power, it delivers a high sound level. The maximum peak SPL of 127.5 dB confirms its ability to handle dynamic passages, useful both in live performance and music playback. The frequency response from 50 Hz to 20 kHz covers a wide useful range, with a solid foundation in the low spectrum for a full-range speaker.
Filtering and Processing: Recommendations for Clean Configuration
The crossover frequency is specified at 1.6 kHz, and a high-pass filter is recommended at 40 Hz (12/24 dB per octave slope) to protect the speaker from very low frequencies that do not always benefit front-of-house use but can consume power and reduce headroom before distortion. For more advanced optimization (equalization, limiter, protection), an external DSP processor is recommended (FBT DSP Processor), which can be a real advantage for securing a system in regular use.
Installation and Everyday Practicality
The X-Lite 115 is designed to adapt to many setups: on surfaces, wall or ceiling mounted, or as a floor stage monitor. The M10 inserts facilitate fixed installations, while the 35 mm pole mount allows classic stand mounting. Adjustable brackets are available separately (XL-UH15 / XL-UV15) to fine-tune the dispersion angle according to the room.
Technical specifications
| Bluetooth | No | ||
| Model | FBT X-Lite 115 | Frequency response | 50 Hz to 20 kHz |
| Type | passive speaker | Sensitivity | 98 dB (1 W / 1 m) |
| Configuration | 2-way | Maximum peak SPL | 127.5 dB |
| Design and manufacturing | Italian | Crossover frequency | 1.6 kHz |
| Manufacturer reference | 46169 | Recommended high-pass filter | 40 Hz - 12/24 dB per octave |
| Color | black | Recommended external filter | FBT DSP Processor |
| Recommended amplifier | 400 W RMS | Input connectors | 2x Speakon |
| RMS power | 200 W | Enclosure material | injected polypropylene |
| Peak power | 800 W | Mounting | 4x M10 inserts, 35 mm pole mount |
| Nominal impedance | 8 ohms | Installation options | surface, wall or ceiling, floor stage monitor |
| Woofer/midrange | 15 inches (381 mm), voice coil 2.5 inches (63.5 mm) | Adjustable brackets (sold separately) | XL-UH15 / XL-UV15 |
| Tweeter | 1 inch (25.4 mm), voice coil 1.4 inches (35.56 mm) | Handling | 2 handles |
| Dispersion | 90 deg H x 60 deg V | ||
Questions frequently asked
Which amplifier should be used with the FBT X-Lite 115?
This 8-ohm passive speaker requires a recommended amplifier of 400 W RMS, with a peak power rating of 800 W.
Does the X-Lite 115 provide enough bass without a subwoofer?
The 15-inch driver covers a frequency response of 50 Hz to 20 kHz. This setup delivers substantial bass and low midrange for vocals, keyboards, and DJ tracks. A high-pass filter at 40 Hz with a slope of 12 or 24 dB per octave is recommended to protect the speaker from very low frequencies.
What connectivity is available on this passive speaker?
Two Speakon connectors are built in for connecting to the power amplifier.
Can it be used as a stage monitor?
The injected polypropylene enclosure can be placed on the floor in a stage monitor setup. Weighing 20.5 kg and with two handles, handling remains suitable for mobile performances.
How can an FBT X-Lite 115 be mounted on a stand or wall?
The 35 mm socket allows for pole mounting. Four M10 inserts enable wall or ceiling installation. The adjustable XL-UH15 and XL-UV15 brackets are available separately to adjust the dispersion angle.
