K&M 26778 Stand
Estimated Shipping Widget will be displayed here!
What you need to know
What you need to know
- Quick and clean desk installation thanks to the table clamp (desk thickness from 10 to 52 mm), ideal for home studios and control rooms.
- Precise positioning: height adjustable in 4 steps (335 to 435 mm), continuous tilt from 0deg to 12.5deg, and 360deg rotation of the platform.
- Stability and safety: steel construction, anti-slip stop bar, centered load capacity up to 25 kg.
- Better isolation on the desk with 4 rubber pads for non-slip support and decoupling to limit vibrations.
Manufacturer Information
K&M
https://www.k-m.de
contact@k-m.de
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
A Stand Designed to Optimize the Ergonomics of Monitoring Setups
In a modern production environment, the placement of nearfield monitors is as important as their quality: height, angle, and orientation directly influence the stereo image and the accuracy of judgment. This table stand follows this logic by combining a robust metal construction with practical adjustments to adapt your monitoring to the geometry of your workstation, without cluttering the desk with floor stands.
Who Is It For and What Are Its Studio Uses?
This stand is intended for musicians, beatmakers, sound engineers, and content creators who want to save space and position their speakers at the correct level on a desk. The table clamp allows installation of nearfield monitors on relatively thin surfaces as well as thicker desks, while maintaining excellent rigidity. It is also a relevant solution if you alternate between nearfield listening and working on a screen, seeking consistent and reproducible alignment for each session.
Technical specifications
| Cover included | No | Height adjustable | Yes |
| Foldable | No | Support | table |
| Security/locking | Yes | Color | Black |
| Category | speaker stand | Maximum supported weight | 25 kg |
| Use | monitor speaker, speaker | Weight | 3.1 kg |
| Material | steel | minimum height | 335 mm |
| Orientation | vertical | maximum height | 435 mm |
You will also like
IsoAcoustics
ISO-Puck Mini Set
IsoAcoustics
ISO-130
K&M
26792 Plate
K&M
26776 Stand
K&M
8000-402B Stand Wall
Neumann
LH 32
K&M
8000-402W Stand Wall
IsoAcoustics
ISO-Puck 76
Questions frequently asked
What desk thickness does the K&M 26778 Stand accommodate?
The desk clamp fits tabletops with a thickness ranging from 10 to 52 mm. The steel frame ensures the stand is securely fixed to the desk.
What load can this monitor speaker stand support?
The maximum capacity is 25 kg with a centered load. The 230 x 250 mm plate can be moved to adjust the center of gravity according to the installed speaker.
Does the stand allow precise adjustment of the monitor height and angle?
Four height positions are available, from 335 to 435 mm. The tilt adjusts continuously from 0 to 12.5°. The plate rotates 360° and its support turns 180° to direct the speaker as needed.
How to prevent a speaker from sliding on the tilted plate?
A stop bar holds the speaker on the plate, while rubber pads limit movement and reduce vibrations transmitted to the desk.
Is this stand suitable for a desk monitoring setup?
Its clamp mounting frees up floor space and allows placing monitors at a height between 335 and 435 mm. The vertical orientation and tilt adjustments facilitate aligning the tweeters toward the listening position.
