LD Systems LD Roadman 102 SP

A Speaker Designed to Complement the Roadman Ecosystem

Designed as a natural extension of Roadman systems, this passive speaker allows you to increase sound coverage in a room, better distribute sound during a presentation, or reinforce projection during an event. Its principle is simple and effective: connect it to the speaker output of your Roadman system, and you get an additional diffusion point consistent with the architecture and field use of the range.

The connection must be made to the Roadman system's speaker output, respecting the impedance guidelines related to the "SWITCHED" / "UNSWITCHED" outputs: the "SWITCHED" output accepts a speaker with a nominal impedance of 4 Ohms minimum, while the "UNSWITCHED" output requires a speaker with a nominal impedance of 8 Ohms minimum. This speaker, rated at 8 Ohms, naturally fits a safe configuration on the "UNSWITCHED" output.

Intended Uses and Users

This Roadman passive speaker is aimed at users who prioritize reliable, quick-to-install sound reinforcement adapted to mobile contexts: teachers, speakers, local authorities, associations, event hosts, trainers, or musicians needing simple reinforcement for sound diffusion. It is particularly suitable when you want to relocate the sound (back of the room, side area, second room) or improve speech intelligibility by distributing sources rather than increasing volume at a single point.

Thanks to its stand mount (36 mm diameter), you can elevate it to optimize coverage and clarity, especially for vocals. And with its wheels and trolley handle, it remains practical to move, even during repeated setups.

A Simple and Effective Configuration, Designed for Voice and Events

At the heart of this speaker is a 10-inch (254 mm) woofer for lows and mids, paired with a 1-inch (25.4 mm) tweeter. This combination is a proven standard for achieving a good balance between impact, vocal presence, and reasonable size. The ferrite magnets on both woofer and tweeter favor robustness and stability, appreciated in mobile use.

Speaker Connection via 6.35mm Jack

The speaker features a speaker input and a speaker output, both in 6.35mm Jack format. This choice facilitates cabling within a Roadman context, to chain or adapt a simple setup. Be sure to use a speaker cable (not an instrument cable), and to respect the impedance constraints of the sound system to which you connect it.

Sound Level and Frequency Response Suitable for Common Performances

With a sensitivity rated at 95 dB (for 1 W at 1 m) and a maximum level of 115 dB, this speaker is designed to deliver comfortable volume in many situations: speeches, classes, presentations, small musical events. Its frequency response of 70 Hz to 16,000 Hz emphasizes the essentials: clean and intelligible reproduction without complicating the setup.

Technical specifications

Type	Passive	Sound Pressure Level (for 1 W at 1 m)	95 dB
Impedance	8 Ohms	Maximum Sound Pressure Level	115 dB
Power (RMS)	80 W	Speaker Inputs	1
Power (Peak)	320 W	Speaker Input Connectors	6.35mm Jack
Woofer/Midrange Diameter	10 inches	Speaker Outputs	1
Woofer/Midrange Diameter (mm)	254 mm	Speaker Output Connectors	6.35mm Jack
Woofer Magnet	Ferrite	Width	355 mm
Tweeter Diameter	1 inch	Height	610 mm
Tweeter Diameter (mm)	25.4 mm	Depth	315 mm
Tweeter Magnet	Ferrite	Weight	13.5 kg
Frequency Response	70 Hz - 16,000 Hz	Diameter	36 mm