Marshall PEDL-00045 4-WAY FOOTSWITCH FOR JVM2
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Couldn't load pickup availability
Information
Information
Manufacturer Information
Marshall
https://www.group.marshall.com
contactus@marshall.com
------------------------
Safety manager:
Marshall Group
Email: contactus@marshall.com
Address:
Designed for the Marshall JVM Line
Conceived as the natural companion for JVM 2-channel heads and combos, this pedalboard embodies the "play without thinking" spirit cherished by modern Marshall amps. It centralizes the JVM's essential functions into a true foot control center while maintaining the simplicity and reliability of a traditional footswitch.Who and in What Contexts?
Whether you are a rock, hard rock, modern blues, or pop guitarist, this footswitch is aimed at musicians who perform songs with contrasting soundscapes. Ideal for live use with clean transitions, it is equally comfortable in the studio, allowing instant recall of your favorite settings without putting down the guitar. It integrates easily into any pedalboard thanks to its compact format and direct cabling to the amp.Smart Controls, Assignments, and Connectivity
The 4 footswitches, equipped with indicator LEDs, can be assigned to key JVM 2-channel functions: channel selection, reverb on/off, effects loop activation, toggle between Master 1/2, or even recall a mode or stored state depending on your amp's capabilities. The design prioritizes reliability (metal chassis, smooth switching) and stage visibility. Connection is made via the amp's dedicated footswitch jack using a suitable 6.35mm Jack cable (TRS/TS depending on the JVM model).Sound Quality
Completely transparent, this footswitch does not process the audio signal and therefore does not color your tone. Its silent switching minimizes "pops" and lets the amp express its full dynamics and playing response. You retain the attack, definition, and Marshall character, while gaining operational fluidity.Technical specifications
| Number of lanes | 4 |
| Category | footswitch |
| Destination | Marshall JVM 2 canaux |
| Color | Black |
| Number of channels | 4 |
| Typical assignable functions | channel, reverb, effects loop, Master 1/2 (depending on amp compatibility) |
| Intended for | Marshall JVM 2-channel amplifiers |
| Recommended cable | suitable 6.35mm Jack (TS or TRS depending on JVM model) |
| Connection cable | not included |
| Documentation | quick start guide |
| External power supply | not required |
| Required voltage | none (power supplied by the amp via the footswitch jack) |
| Consumption | none (no 9V/12V/18V connection needed) |
Questions frequently asked
Is the Marshall PEDL-00045 footswitch compatible with all JVM amps?
This footswitch is intended for 2-channel Marshall JVM amplifiers. Compatibility with JVM versions of other configurations is not specified.
What cable is needed to connect this footswitch to the amp?
The connection uses the amp's dedicated footswitch jack and requires a suitable 6.35 mm jack cable. The type TS or TRS depends on the JVM model, and the cable is not included.
What functions can be controlled with the 4 switches?
The 4 switches can manage channel selection, reverb, effects loop, and Master 1/2. Depending on the amp's capabilities, a mode or preset state recall can also be assigned. Indicator lights make it easier to identify functions on stage.
Is a 9V power supply required?
No external 9 V, 12 V, or 18 V power supply is needed for this footswitch.
Does the PEDL-00045 alter the amp's sound?
The switching does not process the audio signal and does not color the sound. The switching is described as silent to minimize pops during function changes.
