Mipro MRM-58
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Essential Information About the Mipro MRM-58 Plug-in Receiver
Essential Information About the Mipro MRM-58 Plug-in Receiver
- 5.8 GHz Plug-in Receiver : integrates directly into a compatible portable PA system without an external casing.
- 12 channels and SCAN + ACT functions to quickly find a clear frequency and synchronize the transmitter.
- Wideband audio quality (20 Hz to 20 kHz) with a signal-to-noise ratio greater than 115 dB(A) and latency under 2.6 ms.
- Convenient displays : battery level and signal strength for immediate monitoring in use.
Manufacturer Information
Mipro
https://www.mipro.com.tw
mipro@mipro.com.tw
------------------------
Safety manager:
MSC Distribution
Email: infos@msc-distribution.com
Address:
A Module at the Heart of Mipro's 5.8 GHz Wireless Ecosystem
The Mipro MRM-58 is designed as a compact receiver dedicated to the ACT-58 and MT-58 transmitter families. Its "plug-in" format makes it an ideal solution to quickly convert a compatible Mipro portable PA system into a clean, lightweight, and easy-to-deploy wireless system, while maintaining consistency with the manufacturer's 5.8 GHz range.
Who Is It For and What Are Its Uses?
This receiver is aimed at users of Mipro portable PA systems (speeches, hosting, group classes, presentations, mobile events) who want quick setup, simplified synchronization, and clear battery monitoring. It is suitable for users equipped with a handheld microphone, headset microphone, or compatible belt-pack transmitter.
Key Features: Simplicity, Control, and Responsiveness
SCAN + ACT: Accelerated Setup
The SCAN function helps select an available channel, while ACT facilitates pairing with the transmitter for efficient configuration even when setup time is limited.
Low Latency and Faithful Reproduction
With a latency under 2.6 ms and a frequency response from 20 Hz to 20 kHz, the MRM-58 promotes a natural vocal feel and good intelligibility, while maintaining a very low noise floor thanks to its signal-to-noise ratio greater than 115 dB(A).
Technical specifications
| Category | receiver | Frequency band | 5,8 Ghz |
| Model | Mipro MRM-58 | Sensitivity | +12 dB microV |
| Type | 5.8 GHz plug-in receiver | Dimensions | 75 x 35 x 149 mm |
| Number of channels | 12 | Weight | 82 g |
| Carrier frequencies | 5.725 to 5.850 GHz | Latency | under 2.6 ms |
| Functions | SCAN, ACT | Signal-to-noise ratio | greater than 115 dB(A) |
| Displays | battery level, signal level | Frequency response | 20 Hz to 20 kHz |
You will also like
Shure
BLX1-M17
Shure
BLX2-PG58-M17
Samson
CR88 - DIVERSITY RECEIVER FOR CONCERT 88
LD Systems
LDWS1616BP Sweet Sixteen BP
Mipro
ACT-32T Pocket Transmitter
Mipro
ACT 32H UHF HANDHELD TRANSMITTER FOR MRM-70
Mipro
MTG 100Ra
Mipro
MRM 24
Questions frequently asked
Is the Mipro MRM-58 compatible with the ACT-58 and MT-58 transmitters?
This receiver is designed to work with the Mipro ACT-58 and MT-58 transmitters. Its plug-in format allows integration with a compatible portable Mipro PA system.
How to pair the Mipro MRM-58 receiver with a transmitter?
The SCAN function selects an available channel among 12 channels. The ACT function then facilitates pairing with the transmitter. The carrier frequencies range from 5.725 to 5.850 GHz.
What is the latency of the Mipro 5.8 GHz wireless receiver?
The specified latency is under 2.6 ms, which limits the perceptible delay between the voice and its broadcast.
Is the transmitter's battery level displayed on this receiver?
The display shows both the battery level and the signal strength. This information helps monitor power autonomy and reception during use.
What frequency response does the MRM-58 offer?
The frequency response covers 20 Hz to 20 kHz, with a signal-to-noise ratio above 115 dB(A).
