Musicnomad MN810 L-BEAM FRET LEVEL SANDING BAR FOR GUITARS UKULELES MANDOLIN - 18 CM
Estimated Shipping Widget will be displayed here!
Couldn't load pickup availability
Information
Information
Manufacturer Information
Musicnomad
https://www.musicnomadcare.com
info@musicnomad.com
------------------------
Safety manager:
HIGH TECH DISTRIBUTION
Email: pro@htd.fr
Address:
A dressing tool designed for clean setups, both in the workshop and at home
The MusicNomad L-Beam MN810 is a sanding beam dedicated to fret leveling and flattening the fingerboard on guitars, ukuleles, and mandolins. Its 7-inch (18 cm) size is ideal for localized work, hard-to-reach areas, and precise adjustments. To accommodate different necks and working methods, the range also includes 17.6-inch (45 cm) and 24-inch (61 cm) versions.
To save time without sacrificing finesse, MusicNomad focuses on impeccable geometry: the working surfaces are specified with a tolerance of plus or minus 0.00125 inch per foot. The supplied adhesive abrasives apply quickly and stay firmly in place to ensure consistent sanding before finishing steps (crown, polishing) according to your procedure.
Technical specifications
| Category | Tools | Use | fretboard, fret, guitar |
| Type | sanding beam / leveling beam for frets and fingerboard | Edges | beveled to limit impacts on frets |
| Model | MusicNomad MN810 L-Beam | Working surfaces | flat top and bottom surfaces, 3-step precision grinding |
| Length | 18 cm (7 inches) | Specified tolerance | plus or minus 0.00125 inch per foot |
| Compatibility | guitars, ukuleles, mandolins | Included abrasives | 3M Stikit Gold adhesive strips, 2x P240 grit and 1x P400 grit |
| Design | thick sides, optimized weight | Reference | OPC2511M10 |
| Handle | ergonomic curved, anti-slip | ||
Questions frequently asked
Is the MusicNomad MN810 bar suitable for a guitar, ukulele, or mandolin?
This 18 cm bar is designed for fret leveling and fingerboard flattening on guitar, ukulele, and mandolin.
What is the length of the MN810 leveling bar?
The 7-inch size corresponds to 18 cm. This length is intended for localized work and hard-to-reach areas.
What abrasive grits are supplied with the L-Beam MN810?
Three 3M Stikit Gold adhesive strips are included: two with P240 grit and one with P400 grit. They attach to the working surfaces for sanding before crowning and polishing steps. Their adhesive backing helps keep the abrasive in place.
What flatness accuracy is specified for this fret leveling bar?
The top and bottom surfaces have a tolerance of plus or minus 0.00125 inch per foot, achieved through a three-step precision grinding process.
Does the MN810 feature protective edges for the frets?
Its chamfered edges reduce impacts on the frets during work. The curved, non-slip handle and thick sides complete its design.
