Nux 2-WAY PEDALBOARD WITH LEDS - 3 MODES
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Essential Information About the NUX NMP-2 Footswitch
Essential Information About the NUX NMP-2 Footswitch
- 3 operating modes to adapt to each device: Open, Close, Latch
- 2 channels with LED indicators (LEDs active in Open mode with power supply)
- Compatible with 6.35mm Jack control inputs on amplifiers, pedals, keyboards, and synthesizers
- Designed for NUX Loop Core Deluxe, JTC Drum & Loop PRO, and Cerberus
Manufacturer Information
Nux
https://www.nuxaudio.com
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
A NUX Controller Designed for Modern Setups
The NMP-2 is not limited to a "classic" 2-channel footswitch: its Open/Close/Latch modes allow you to have both momentary behavior and "latch" triggering, depending on the needs of your amp or pedal. A real advantage for securing a pedalboard and gaining speed on stage.
Who and in What Contexts?
Ideal for guitarists both live and in the studio who want to control a channel, reverb, tap/trigger, or loop/drum functions remotely. It is also suitable for keyboardists and synthesizer users looking for a simple, robust, and adaptable foot controller.
Modes and Operation: Open, Close, Latch
Open: momentary switches, active mode (power required for LEDs). Close: momentary press in passive mode (no power, LEDs inactive). Latch: traditional "latch" switching, on/off by press.
Sound Quality
The NMP-2 does not color the sound: it acts as a reliable controller for your changes, with a crisp triggering feel designed for stage use.
Technical specifications
| IR loader | No | Material | metal |
| Category | amp accessory | Headphone outputs | No |
| Type | footswitch | Color | Grey |
| Destination | Guitar amplifier, effect pedal | Colours | Aluminium |
| Intended for | guitar amp, effects pedal | Latch mode | latch operation, on/off by press |
| 3 modes | Open, Close, Latch | Inputs | jack A (mono) or jack B & A (mono/stereo) |
| Open mode | momentary press, active mode (LEDs with power) | Power supply | not included |
| Close mode | momentary press, passive mode (LEDs inactive) | Required power supply | 9V DC |
You will also like
Fender
2-switch ABY pedal, red
Singular Sound
Beatbuddy Footswitch+
Orange Amps
MCFS-MINI FOOTSWITCH MCFS MINI
Vox
VFS2 2 WAY FOOTSWITCH
Zoom
FS-01 FOOT CONTROLLER
Ashdown
FOOTSWITCH FS-1
Ibanez
Footswitches IFS2l
Blackstar
FS-19 (ST.JAMES EL34)
Customer reviews
Based on 1 review
- 5 stars, 0 reviews
- 4 stars, 1 review
- 3 stars, 0 reviews
- 2 stars, 0 reviews
- 1 star, 0 reviews
The review form didn't open. Please try again.
-
Small size, switches without “hard spots”, possibilities to configure temporarily open, temporarily closed or permanent. These last two modes require a conventional 9V power supply.
In temporary mode, the LEDs only light up while the footswitch is pressed.Automatically translated
No reviews match this filter.
Reviews can't be loaded right now. Please try again.
Automatically translated
Questions frequently asked
Is the Nux NMP-2 compatible with a guitar amp or an effects pedal?
This model is designed for guitar amps and effects pedals. The controlled functions depend on the connected device, such as a channel, a reverb, a tap/trigger, or loop/drum functions.
What are the Open, Close, and Latch modes?
The Open mode offers an active momentary press and allows the LEDs to light up with power. The Close mode works with a passive momentary press, without LEDs. The Latch mode provides a toggle switch, activating and deactivating with each press.
What kind of connectivity does this Nux footswitch use?
Connection is made via the A jack in mono, or via the B and A jacks in mono/stereo configuration.
Is a power supply required for the NMP-2?
A 9 V DC power supply is required for Open mode and the LEDs, but it is not included. Close mode can operate passively, with the LEDs inactive.
Is the footswitch suitable for stage use?
Its metal enclosure with aluminum finish is designed for foot control. The two switches allow quick changes in a pedalboard or amp setup.
