Shure PS411-PC-POWER SUPPLY DISTRIBUTION PS411-PC
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
What you need to know
What you need to know
- Designed for power distribution: intended to power a P3T system when connected to the PA411.
- 2.1 mm electrical connector: format suitable for compatible equipment in the power chain.
- Simple and straightforward design: without a switch, for commissioning via upstream power supply.
- A cable dedicated to a specific configuration: ideal for securing clean wiring on stage or in a rack.
Manufacturer Information
Shure
https://www.shure.com
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
A Cable Designed to Complement a P3T and PA411 Power Chain
This power cable fits within a system logic: it serves to ensure power distribution for a P3T connected to the PA411. In a sound reinforcement or monitoring setup, this type of dedicated cable helps maintain a coherent installation, with quick and repeatable connections, especially when the equipment remains rack-mounted.
Intended Uses and User Profiles
This cable is aimed at musicians, sound technicians, and service providers who use a P3T in connection with a PA411 and seek wiring adapted to this configuration. It is suitable for both live use (frequent setup/teardown) and fixed installations, provided that the 2.1 mm electrical connector format matches your equipment.
Technical specifications
| Connectors | Electric 2.1mm |
| Category | Power cable |
| Color | Black |
You will also like
Mipro
E-10S-100S (set of 100)
Mipro
E-10S-100L (set of 100)
Alctron
HA-8p
Sennheiser
IE PRO CABLE MONO - CABLE FOR IE 100 PRO
Mipro
Replacement Foam For E20S (100 Piece)
Definitive Audio
INEAR POCKET UHF 100
Rockboard
HA 1
Shure
SE215-315-425-535 cable Transparent
Questions frequently asked
Is the PS411-PC cable compatible with a P3T and a PA411?
The power distribution is designed for a P3T connected to a PA411. This reference is therefore part of this Shure system configuration.
What connector does this power cable use?
The electrical connector specified uses a 2.1 mm format. Compatibility depends on the presence of this format on the related equipment.
Can it be installed in a monitoring rack?
Its use is suited for setups where a P3T and a PA411 remain wired in a rack. This allows consistent and repeatable connections during system operation.
Does the cable have a switch?
No switch is integrated: power management is handled from the upstream source or the designated distribution device.
Are the connectors of the PS411-PC molded?
The connectors are not specified as molded, and the cable is not seamless. Its finish is black.
