CopperSound Cir-Kit Component Bag Mini Boost
Estimated Shipping Widget will be displayed here!
What you need to know
What you need to know
- Everything you need to build the "Mini Boost" circuit in Cir-Kit format
- Compatible with all Coppersound Cir-Kit DIY breadboards
- Included documentation : resistor color code chart + assembly guides
- Sound character : "Mini Boost" comparable to an Electra circuit without clipping
Manufacturer Information
CopperSound
------------------------
Safety manager:
Filling Distribution
Email:
Address:
A Cir-Kit pack designed to explore DIY classics
The Cir-Kit Component Bags are designed to capture the spirit of iconic pedal circuits, in an accessible version focused on prototyping on breadboards. The "Mini Boost" fits this approach: a simple, direct, and musical boost, ideal for understanding the impact of each component on gain and dynamics.
Who is this Mini Boost for?
This kit is aimed at guitarists and tinkerers who want to build, test, and refine a homemade boost: to push an amp, thicken a clean tone, or place a gain stage before an overdrive. It is also an excellent entry point to learn the basics of assembly and troubleshooting.
What this component pack enables
Each pack includes the components necessary for the specified circuit, as well as reference materials (resistor color codes) and assembly guides to help you progress more confidently. Important: assembly is the user's responsibility; it is recommended to test each component before soldering. In case of defective components, please contact us before assembly for replacement.
Other available circuit component packs
- Hard Clip Distortion (comparable to the RAT)
- Silicon Fuzz (comparable to the Silicon Fuzz Face)
- The Shrieking Eel (like the Short Circuit with Josh Scott)
- MOSFET Boost (comparable to the Jack Orman MOSFET Boost / Super Hard On)
- 3-band EQ (comparable to the Baxandall EQ)
- Treble Boost (comparable to the Rangemaster)
- Single Transistor Overdrive (comparable to the Electra Distortion)
- Mini Fuzz (comparable to the Bazz Fuss)
- Mini Boost (comparable to the Electra without clipping) Warning
Technical specifications
| Fictitious load | No | Destination | effect pedal |
| IR loader | No | Headphone outputs | No |
| Category | amp accessory | Color | Transparent |
| Type | Others | ||
| DIY Cir-Kit component kit | Component Bag Mini Boost | Recommendation | test each component before soldering |
| Circuit | Mini Boost (comparable to the Electra without clipping) | In case of defective components | contact us before assembly for replacement |
You will also like
Dunlop
ECB424B "HOT-POTZ" POT II 100K CRYBABY
Rockboard
HOOK & LOOP TAPE 6000 MM X 50 MM
Dunlop
PLATE + BATTERY DOOR + CRYBABY PADS
CopperSound
Cir-Kit Component Bag Silicon Fuzz
Ernie Ball
6162 POTENTIOMETER FOR PEDAL 6165
CopperSound
Cir-Kit Component Bag Single Transistor Overdrive
Truetone
CL-multi 8
CopperSound
Cir-Kit Component Bag Mini Fuzz
Questions frequently asked
Does the kit include the components needed to assemble the boost?
The Component Bag Mini Boost pack includes the components necessary for the Mini Boost circuit. Assembly guides and a resistor color code reference are also provided.
Does the CopperSound Cir-Kit Component Bag Mini Boost include a headphone output?
No headphone output is specified for this DIY component pack.
Should the components be tested before soldering?
Assembly is the user's responsibility. Each component should be tested before soldering. In case of a defective component, contact is recommended before assembly to arrange a replacement.
What kind of gain does the Mini Boost circuit provide?
The Mini Boost circuit is designed as a simple boost, intended to drive an amp or thicken a clean tone. It can also be placed before an overdrive as a gain stage.
Is this pack intended for an effect pedal?
The stated purpose is an effect pedal. The circuit is designed for prototyping on a breadboard.
