CopperSound Cir-Kit Component Bag Single Transistor Overdrive
Estimated Shipping Widget will be displayed here!
What you need to know
What you need to know
- Ready-to-wire DIY kit : a selection of components intended to build a "Single Transistor Overdrive" circuit on a breadboard.
- Cir-Kit Compatibility : designed to work with the DIY breadboards from the Coppersound Cir-Kit ecosystem.
- Included Documentation : resistor color code chart + assembly guides to support you step-by-step.
- DIY Spirit Assumed : assembly is the user's responsibility, with a recommendation to test each component before soldering.
Manufacturer Information
CopperSound
------------------------
Safety manager:
Filling Distribution
Email:
Address:
Cir-Kit: Coppersound's Approach to Exploring Pedal Circuits
With the Cir-Kit range, Coppersound targets guitarists, tinkerers, and curious minds who want to understand "what makes the sound" of a pedal, without necessarily starting with a complex boxed project. The principle is simple: a compatible DIY breadboard, a circuit schematic, then an adapted component pack. This Single Transistor Overdrive version fits this logic of rapid experimentation: you assemble, test, tweak, and learn by playing.
Who Is It For, and What Are the Uses?
This kit is aimed at those who want to prototype an overdrive in an educational and flexible way: musicians who like to shape their tone at the source, enthusiasts of musical electronics, makers, or simply guitarists who want to discover DIY without immediately diving into building a full pedal (drilling, wiring switches, enclosure integration, etc.).
On a breadboard, you can quickly compare the output with your usual chain (guitar, amp, other effects) and understand how an overdrive circuit reacts to attack, guitar volume, and playing dynamics. It's also an excellent base to explore component value differences and the influence of certain wiring choices, while maintaining a "plug, test, tweak" approach.
A Simple, Lively, and Expressive Overdrive Circuit
The Single Transistor Overdrive is among those circuits known for their simplicity and musicality. In the spirit of "single transistor" overdrives often associated with the Electra Distortion style, it delivers a direct grain, progressive saturation, and a very sensitive response to the picking hand: perfect for moving from a light breakup to a more biting saturation by adjusting playing intensity or lowering the guitar volume.
An Ideal Approach to Learn (and Hear) Electronics
This type of circuit is particularly instructive: fewer stages, clearer reading, and audible results quickly. On a breadboard, you can take your time to identify components, understand their roles, and validate your assembly before any soldering. The pack includes a resistor color code chart, very useful to avoid value mistakes, as well as assembly guides to secure your build.
The "Component Bag" Format: Everything You Need, Nothing Superfluous
The goal is not to overwhelm you with generic parts: this pack is designed as a dedicated component set for the Single Transistor Overdrive circuit, ready to use with compatible Cir-Kit DIY breadboards. You save time on preparation, limit omissions, and stay focused on what matters: assembly, listening, then possible adjustments.
Important: DIY Spirit and Best Practices Before Soldering
This kit is intended for DIY: assembly and testing are entirely the user's responsibility. It is strongly recommended to test each component before applying solder or soldering anything. A defective component can occur, and it is always better to detect it before installation. If an issue is found with a component before assembly, a replacement solution can be considered: the idea is simple, better to diagnose early to fully enjoy the Cir-Kit experience.
Technical specifications
| Fictitious load | No | Destination | effect pedal |
| IR loader | No | Headphone outputs | No |
| Category | amp accessory | Color | Transparent |
| Type | Others | ||
| Target circuit | Single Transistor Overdrive | Recommendation | test each component before soldering |
| DIY assembly | no warranty related to assembly, which is the user's responsibility | If a defective component is identified before assembly | contact the seller before building for support |
You will also like
Dunlop
ECB424B "HOT-POTZ" POT II 100K CRYBABY
Rockboard
HOOK & LOOP TAPE 6000 MM X 50 MM
Dunlop
PLATE + BATTERY DOOR + CRYBABY PADS
CopperSound
Cir-Kit Component Bag Silicon Fuzz
Ernie Ball
6162 POTENTIOMETER FOR PEDAL 6165
CopperSound
Cir-Kit Component Bag Mini Boost
Truetone
CL-multi 8
CopperSound
Cir-Kit Component Bag Mini Fuzz
Questions frequently asked
Is the kit compatible with a Cir-Kit breadboard?
The component kit is designed for use with DIY breadboards compatible with Cir-Kit. No pedal enclosure, switch wiring, or drilling operations are planned for this format.
What sound does the Single Transistor Overdrive circuit produce?
The circuit aims for a direct grain and progressive saturation, in the spirit of single transistor designs associated with the Electra Distortion style. The guitar's attack and volume response allows going from a slight breakup to a more biting saturation.
What elements are included in the Component Bag?
Included are the components dedicated to the Single Transistor Overdrive circuit, a resistor color code chart, and assembly guides.
Should the components be tested before soldering?
Before any soldering, each component must be tested. DIY assembly remains the user's responsibility. In case a defective component is identified before assembly, the seller should be contacted for support.
Does this kit help understand how an overdrive works?
The breadboard assembly allows identifying the components and observing the influence of their values on the circuit. The simplicity of the single transistor design makes it easy to follow the different stages.
