DPA 4099

Essential Information About the DPA 4099 CORE Instrument Microphone (High SPL) 4099-DC-2-199-T

• "CORE by DPA" Technology for minimized distortion, greater clarity, and detail across the entire dynamic range.


• Supercardioid Directionality offering high off-axis rejection and excellent gain before feedback on stage.


• Non-marking Clip Mount, extendable 140 mm gooseneck, shock mount, and robust detachable cables.


• Flexible Connectivity: MicroDot to XLR via adapter and wireless system compatibility thanks to DPA adapters.

A Modern Standard for Instrument Sound Capture

The 4099 has become a benchmark for capturing acoustic instruments, from piano to strings, woodwinds, brass, or percussion. The "CORE" version raises the bar with a more open sound image and controlled dynamics, whether in the studio, rehearsal, or on large stages. IP58 certified, it withstands the rigors of live performance while preserving the subtlety of timbres.

For Whom and For What Uses?

Designed for musicians, backliners, and sound engineers, the 4099 CORE High SPL adapts to a wide range of instruments and environments. Its dedicated clip secures positioning without damaging the finish, and the gooseneck allows precise and repeatable placements. For drums, very powerful percussion, or trumpet, an Extreme SPL version exists within the same series.

Technical specifications

Directional pattern	supercardioid	XLR adapters	DAD4099 (with integrated low-cut filter) or DAD6001 (without low-cut filter)
Operating principle	pressure gradient	Current consumption	typ. 1.5 mA (microphone); 3.5 mA with XLR adapter
Capsule type	pre-polarized condenser	output principle	balanced signal with the DAD4099-BC or DAD6001-BC XLR adapter
Frequency response	20 Hz to 20 kHz	Nominal output impedance	MicroDot 30 to 40 ohms; 100 ohms with DAD4099-BC or DAD6001-BC
Effective range at 20 cm (+/-2 dB)	80 Hz to 15 kHz, gentle boost of approximately 2 dB between 10 and 12 kHz	Cable transmission	up to 300 m with the DAD6001-BC/DAD4099-BC XLR adapter
Low-cut filter (with DAD4099-BC)	second-order at 80 Hz	Certification	IP58
Polarity	+V at the MicroDot pin for positive pressure (and pin 2 via the DAD4099-BC or DAD6001-BC XLR adapter)	color	Black
Nominal sensitivity (+/-3 dB at 1 kHz)	6 mV/Pa; -44 dB re. 1 V/Pa	Microphone weight	17 g
Equivalent noise level, A-weighted	typ. 23 dB(A) re. 20 micropascals (max. 26 dB(A))	Clips and mounts (indicative)	AC4099 accordion clip 5 g; UC4099 universal clip 15 g; MS4099 stand mount 27.5 g; CS4099 cold shoe mount with standard 6.35 mm Jack thread 5 g
Distortion (THD < 1%)	128 dB SPL RMS, 131 dB SPL peak	Microphone diameter	5.7 mm; length: 45 mm
Dynamic range	typ. 108 dB	Gooseneck length	140 mm; optional extension available
Max SPL (THD 10%)	142 dB SPL peak	Cable length	1.8 m; diameter: 1.6 mm or 2.2 mm (internal Kevlar core)
Common-mode rejection ratio (CMRR)	> 60 dB from 50 Hz to 15 kHz with XLR adapter	Temperature range	-40°C to 45°C; relative humidity: up to 90%
Connector	MicroDot	Sensitivity selection tolerance (at 1 kHz)	+/-1 dB