Mipro AD-708
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
Essential Information About the Mipro AD-708 Antenna Splitter
Essential Information About the Mipro AD-708 Antenna Splitter
- UHF Distribution 2 In / 8 Out + 2 Thru : powers up to 8 receivers from two antennas, with two thru outputs for daisy-chaining.
- Wideband 470-850 MHz : compatible with many UHF RF configurations for rental, fixed installation, or touring.
- TNC Connectors : inputs, outputs, and "Thru" in TNC for clean rack integration.
- Field-Oriented Signal Management : controlled gain and signal loss detection to secure the distribution.
Manufacturer Information
Mipro
https://www.mipro.com.tw
mipro@mipro.com.tw
------------------------
Safety manager:
MSC Distribution
Email: infos@msc-distribution.com
Address:
A Key Component to Ensure Reliability of a UHF RF Rack Installation
The Mipro AD-708 is designed to meet a simple but crucial RF need: centralize and distribute the antenna signal cleanly when the number of receivers increases. Rather than multiplying antennas (and the risks of interference, messy cabling, or uneven levels), this antenna splitter fits at the heart of a UHF system to streamline setup and stabilize reception. With its "Thru" outputs, it also integrates into scalable chains, useful when expanding a receiver fleet as needs evolve.
Who Is It For and What Are the Use Cases?
This splitter is intended for users working with multiple RF links: sound engineers, stage managers, places of worship, theaters, conference centers, studios, or event service providers. It is particularly relevant if you operate a rack of UHF receivers (handheld mics, lavaliers, in-ear monitors) and want to reduce the number of antennas, simplify cable lengths, and gain level consistency across the entire system.
Technical Specifications
General
- Model: Mipro AD-708
- Type: antenna splitter
- Splitter: 2 In / 8 Out / 2 Thru
- Wideband UHF: 470 - 850 MHz
- Gain: 1 dB +/- 1 dB
- Signal loss detection
Connectivity
- Connectors: TNC (2 inputs + 8 outputs + 2 Thru)
Power Supply
- Antenna power supply: 12 ~ 15 V DC
- Power: power adapter included
Impedance
- Impedance: 50 ?
Dimensions & Weight
- Dimensions: 420 x 180 x 44 mm
- Weight: 1.5 kg
Technical specifications
| Model | Mipro AD-708 | Connectors | TNC (2 input + 8 outputs + 2 Thru) |
| Type | antenna splitter | Antenna power supply | 12 ~ 15 V DC |
| Splitter | 2 In / 8 Out / 2 Thru | Power supply | mains adapter included |
| Wideband UHF | 470 - 850 MHz | Impedance | 50 ? |
| Gain | 1 dB +/- 1 dB | Dimensions | 420 x 180 x 44 mm |
| Signal loss detection | yes | Weight | 1.5 kg |
You will also like
Shure
UA864-hi
Shure
UA864-lo
Mipro
AD 90S - Antenna splitter
Mipro
AT-100 Antenna
Shure
UA844+SWB ANTENNA DISTRIBUTOR
Shure
PA805swb
Sennheiser
ADP UHF (470 - 1075 MHZ)
Shure
HA8089
Questions frequently asked
How many RF receivers can be connected to this antenna splitter?
The 8 TNC outputs allow up to eight receivers to be powered from the two antenna inputs. The two inputs are suitable for a diversity antenna configuration.
Is the Mipro AD-708 compatible with my UHF frequencies?
The operating range extends from 470 to 850 MHz. Compatibility therefore depends on using frequencies within this UHF band.
Can a second antenna splitter be added to the rack?
The 2 Thru outputs send the antenna signal to another device. It is thus possible to expand the setup without modifying the cabling of the eight main outputs.
What antenna connectors are used on the AD-708?
All antenna connections use the TNC format: 2 inputs, 8 outputs, and 2 Thru outputs. The specified impedance is 50 Ω.
Can the splitter power active antennas?
A 12 to 15 V DC antenna power supply is available for active antennas or compatible accessories. The power adapter is included. Loss of signal detection helps monitor the upstream link.
