Radial X-Amp Active Reamper
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
The essentials to know about the Radial X-Amp active reamp box
The essentials to know about the Radial X-Amp active reamp box
- Class-A active circuit inherited from the JD7 for a natural, dynamic guitar signal.
- Two independent outputs to simultaneously drive two amplifiers and multiply your tonal textures.
- Balanced XLR input at +4 dBu, converted to a clean, well-controlled unbalanced instrument level.
- Advanced phase management, transformer isolation and ground lift switch for quiet recording sessions.
Manufacturer Information
Radial
https://www.radialeng.com
info@radialeng.com
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
Essential Information About the Radial X-Amp Active Reamp Box
- Class A active circuit, descendant of the JD7, for a natural and dynamic guitar signal.
- Two independent outputs to simultaneously power two amps and multiply textures.
- Balanced XLR input at +4 dBu, conversion to clean and controlled unbalanced instrument level.
- Advanced phase management, transformer isolation, and ground lift switch for silent recordings.
A Studio Standard, Following the JD7 Legacy
Developed by Radial, the X-Amp adopts the high-end approach of the famous JD7 Injector with a Class A active stage optimized for guitar. Designed for professional reamping, it has established itself as a reference tool in studios thanks to its consistent sound at low gain settings and its exemplary shielded steel construction.
The Companion for Guitarists, Producers, and Sound Engineers
Whether you work in a home studio or a commercial studio, the X-Amp allows you to replay a "dry" take through your amps and pedals without recalling the musician. Compare effect chains, test amps in parallel, and fine-tune your tones until you achieve the ideal mix, saving time and energy during sessions.
Technical specifications
| Frequency response - start | 20 Hz | THD | 0,02% |
| Frequency response - end | 15 kHz | Inputs | XLR |
| Category | reamp | Analog outputs | 2 x jack |
| Number of channels | 1 | Power supply | DC 15 V |
| Digital conversion | No | Display | LED |
| Max input level (dBu) | 22 | Weight | 720 g |
| Signal-to-noise ratio | 88 dB instrument level (-20 dBu) | Dimensions (mm) | 84 x 127 x 48 |
| Settings | ground lift switch, phase inverter, output level | ||
You will also like
Radial
J48 CLASS A ACTIVE DI BOX 48V PHANTOM POWERED
Radial
PRO D2 PASSIVE-DI
Radial
JDI PASSIVE-DI
Radial
PRO AV2 - PASSIVE MULTIMEDIA DI STEREO
Walrus Audio
Canvas Stereo
Radial
J33 PHONO RPEAMP DI
Palmer
Pan 16 Pro
Lehle
P-split Stereo
Questions frequently asked
Can a dry track be sent to two guitar amps?
The two 6.35 mm instrument-level outputs allow feeding two amps from the same track. Output 2 is buffered and transformer-isolated.
What connectors does the Radial X-Amp Active Reamper use?
The input is via balanced XLR at +4 dBu level. Both outputs use unbalanced 6.35 mm jacks at instrument level.
How to eliminate hum and phase issues between two amps?
A ground lift switch on the XLR input helps to remove ground loops. The second output benefits from transformer isolation. Its phase inverter allows adjusting polarity between the two amps.
Is the output level adjustable for reamping?
A potentiometer controls the output level, with a clip/overload LED to monitor the signal. The input can accept up to 22 dBu.
Is the X-Amp suitable for home studio use?
Its shielded steel chassis, dimensions of 84 x 127 x 48 mm, and weight of 720 g facilitate integration into a compact control room.
