RCF NXW 44-A

An Active RCF Column Designed for "Large Format" Sound Reinforcement

The RCF NXW 44-A follows a performance and reliability-oriented approach: an active column speaker engineered from the ground up to deliver consistent sound in professional environments. Its "column" format facilitates projection above the audience and optimizes presence in the mix while maintaining a controlled footprint. Balancing available power, precise directivity, and robust construction, it clearly targets stage, club, and event use where consistent coverage and high-level performance are essential.

Who the NXW 44-A Is For: Bands, DJs, Clubs, and Rental

The NXW 44-A is suited for bands seeking precise vocal and instrument reproduction, DJs requiring high levels and stable projection, as well as nightclubs and rental/service providers demanding a system that is quick to deploy, consistent from one event to another, and capable of operating autonomously or within more ambitious setups. Thanks to its extended response down to 45 Hz, it can deliver full-range sound for many configurations; and for high-energy sets or medium-sized concerts, pairing with a subwoofer further enhances low-end foundation and extension.

Technologies and Design: Projection, Precision, and Controlled Bass

2-Way Architecture and Neodymium Speakers

The two-way design combines three 10-inch neodymium woofers with a 3-inch compression driver (neodymium, titanium dome). This transducer choice aims for a balance between efficiency, responsiveness, and high-power handling, maintaining clear reproduction as volume increases. The specified frequency response of 45 to 20000 Hz emphasizes broad spectrum coverage, suitable for both amplified music and demanding speech applications.

CMD Horn: Even Coverage Without Complex Tilting

The CMD (Constant Matching Design) horn is engineered to maintain precise dispersion within the 100 deg x 50 deg coverage area, achieving a more uniform sound across the audience. The goal is to minimize timbre and level variations between center and sides, while avoiding the need for significant speaker tilting to "hit" the listening zone. In practice, this helps better control projection in various venues: halls, clubs, temporary stages, and indoor events.

Class D 2100 W Amplification and RCF DSP Processing

With its Class D amplification totaling 2100 W, the NXW 44-A provides the headroom needed to handle transients (kick drum, snare, bass attacks) and sustain energy over time. Exclusive DSP processing with FiRPHASE and Bass Motion Control contributes to optimizing overall behavior: the speaker aims for maximum clarity in the high frequencies and deeper, better-controlled bass, especially when driven at high volume.

Purpose-Built Design and Secure Installation

The enclosure, made of Baltic birch plywood, is designed to withstand the rigors of transport and use. The NXW 44-A can be used floor-standing, pole-mounted, or hung, and its mounting configuration facilitates reliable installation during events. On the power side, the inclusion of Powercon TRUE1 TOP IN/OUT connectors (IP-rated) supports safer cabling and better suitability for intensive use.

Technical specifications

Bluetooth

No

Sound Pressure Level	up to 135 dB	Constant directivity horn	100 deg x 50 deg
Linear Frequency Response	45 to 20000 Hz	Horn Type	CMD (Constant Matching Design)
System	2-way	Mounting Points	8 x M8
Compression Driver	3-inch, neodymium magnet, titanium dome	Quick Mount Points	8
Woofers	3 x 10-inch high-power, neodymium magnet	Power Connectors	Powercon TRUE1 TOP IN/OUT, IP-rated
Amplifier	Class D	Dimensions	1080 x 297 x 373 mm
Total Power	2100 W	Weight	31.55 kg
Processing	Bass Motion Control, FiRPHASE