T-rex FuelTank Classic, boitier d'alimentation
Estimated Shipping Widget will be displayed here!
The essentials to know about the FuelTank Classic power supply
The essentials to know about the FuelTank Classic power supply
- Multi-voltage power supply for pedalboards: 9 V DC, 12 V DC and 12 V AC to cover the majority of effects pedals.
- Noise reduction thanks to three isolated sections, helping to limit hum, interference and ground loops.
- Ample current reserve: up to 1500 mA in total to power several pedals simultaneously.
- Compact, rugged design intended for stage and studio use, with DC and AC cables included and a 115 V / 230 V mains voltage selector.
Manufacturer Information
T-rex
https://www.t-rex-effects.com
info@t-rex-effects.com
------------------------
Safety manager:
HIGH TECH DISTRIBUTION
Email: pro@htd.fr
Address:
A pedalboard classic: a power supply designed to centralize and stabilize
The FuelTank Classic belongs to the category of âall-in-oneâ power supplies designed to make life easier for guitarists and bassists: a single enclosure, clear distribution, and power that is stable enough to avoid unpleasant surprises both at rehearsals and on stage. Its approach is pragmatic: to offer a complete, compact and sturdy solution capable of powering a varied pedalboard without multiplying the adapters on the floor.Who it is for and how to use it on stage or in the studio
This power supply is ideal if you use several pedals (overdrive, fuzz, delay, reverb, modulation, tuner, etc.) and are looking to achieve cleaner cable management and greater reliability. It is also very well suited to hybrid setups featuring pedals that require 12 V DC or 12 V AC, often found among certain specific effects. In the studio, the benefit is the same: a better-structured power supply helps limit interference, especially when the effects chain becomes complex and scattered power supplies begin to pick up noise.Technical specifications
| Type | power supply for effects pedals | Total current | 1500 mA |
| 9 V DC outputs | 8 outputs, shared ground, 500 mA total | Mains voltage selection | 115 V / 230 V |
| 12 V DC output | 1 isolated output, 500 mA | Cables included | DC and AC cables for most pedals |
| 12 V AC output | 1 isolated output, 500 mA | Dimensions | approximately 160 x 38 x 80 mm |
| Isolated outputs | three isolated sections | Weight | approximately 0.80 kg |
You will also like
Nux
ZEUS JUNIOR 6 ISOLATED OUTPUTS
MXR
DC BRICK
Palmer
PWT08 MK2
Rockboard
Power Block Iso V10
Truetone
1 Spot Pro CS7
MXR
M239 MINI ISO-BRICK POWER SUPPLIES
Rockboard
Power Block Iso V6 IEC 9 To 18V 100/230 Volt
Mooer
MACRO POWER S12 POWER SUPPLY 9-12-15-18V
Questions frequently asked
How many 9 V DC pedals can the FuelTank Classic power?
Eight 9 V DC outputs are available, sharing a common ground and providing a total current of 500 mA for this section.
Is a 12 V AC pedal compatible?
A 12 V AC isolated output delivering 500 mA is provided for effects requiring this power. A 12 V DC isolated output of 500 mA is also available. The voltage and current type required by each pedal must match the output used.
Are all outputs isolated?
The 8 outputs of 9 V DC share their ground. The power supply is organized into three isolated sections, including one 12 V DC output and one 12 V AC output, each delivering 500 mA.
What is the total available power?
The total capacity reaches 1500 mA, distributed among the 9 V DC, 12 V DC, and 12 V AC outputs.
Can the enclosure be used with both 115 V and 230 V?
A 115 V / 230 V mains selector allows adapting the power supply to the relevant electrical network. DC and AC cables are included, and the enclosure measures approximately 160 x 38 x 80 mm weighing 0.80 kg.
