Turbosound TS-18SW700/8A
Estimated Shipping Widget will be displayed here!
What you need to know
What you need to know
- Powerful and precise bass: delivers "tight and punchy bass" over a wide 35 Hz - 2 kHz range.
- Power reserve: 700 W RMS and 2,800 W peak for demanding PA sound systems.
- Wide compatibility: 8 Ohm impedance and 96 dB SPL (1 W/1 m) sensitivity for easy integration.
- Robust construction: rigid die-cast aluminum frame, ideal for replacement or custom enclosures.
Manufacturer Information
Turbosound
https://www.community.musictribe.com
legal@musictribe.com
------------------------
Safety manager:
Music Tribe Brands DK A/S
Email: legal@musictribe.com
Address:
An 18-Inch Driver Designed for Professional Sound Reinforcement
Derived from Turbosound's expertise in professional audio, the TS-18SW700/8A stands out as a reliable choice to enhance the low end of a full-range speaker or dedicated subwoofer. Its design prioritizes efficiency and durability to ensure consistent performance in PA environments.
Who It's For and Applications
Designed for contractors, mobile DJs, theaters, and houses of worship, this 18-inch woofer integrates seamlessly both as a replacement speaker and within custom multi-way speaker cabinets and subwoofers. Its sensitivity and impedance make pairing with most touring amplifiers straightforward and efficient.
Power, Control, and Integration Without Compromise
Power and Dynamics
With 700 W RMS and up to 2,800 W peak, the TS-18SW700/8A delivers solid bass capable of handling high acoustic pressure without distortion. The frequency response from 35 Hz to 2 kHz allows for clean crossover integration with your mid/high drivers depending on the chosen filtering.
Built to Last
The die-cast aluminum frame combines rigidity and lightness to minimize unwanted resonances and ensure reliable heavy-duty use. This material choice promotes optimal mechanical stability, essential for clear and controlled bass reproduction.
Easy Installation
The overall diameter of 460 mm and 442 mm mounting hole spacing simplify fitting into most 18-inch enclosures on the market. The 8 Ohm impedance and 96 dB (1 W/1 m) sensitivity provide great flexibility for pairing with common amplifiers and processors.
Technical specifications
| Rackable | No | Type | Speakers |
| Category | sound reinforcement accessory | ||
| Total diameter | 460 mm (18.11") | SPL | 96 dB (1 W / 1 m) |
| Continuous power | 700 Watts RMS | Mounting hole diameter | 442 mm (17.4") |
| Maximum power | 2,800 Watts | Net weight | 12.8 kg (28.2 lbs) |
| Impedance | 8 Ohms | Shipping weight | 16.5 kg (36.3 lbs) |
| Frequency range | 35 Hz - 2 kHz | ||
You will also like
B&C Speakers
MMD3BTN8M
B&C Speakers
12 HPL 76 4 Ohm
B&C Speakers
10HPL64 16 Ohms
B&C Speakers
5CXN44
B&C Speakers
8FW51
Turbosound
TS-12W350/8A
Turbosound
TS-12W350/8W
Turbosound
TS-15W300/8A
Questions frequently asked
What power handling does the Turbosound TS-18SW700/8A support?
The continuous power rating is 700 W RMS, with a peak power of 2,800 W.
Is this 18-inch speaker compatible with an 8-ohm amplifier?
Its nominal impedance is 8 ohms. This value allows it to be used with amplifiers and processors designed for 8-ohm loads.
What frequency range does this Turbosound woofer cover?
The frequency response extends from 35 Hz to 2 kHz. Crossover with mid/high frequencies is adjusted according to the chosen filtering.
What dimensions should be checked to replace a speaker in a cabinet?
The overall diameter is 460 mm and the mounting diameter is 442 mm. These measurements should be verified on the cabinet before installation. The net weight of the speaker is 12.8 kg.
Is the TS-18SW700/8A suitable for a sound reinforcement subwoofer?
Designed to reinforce bass, this model can be used in a dedicated subwoofer or to replace a speaker in a sound reinforcement enclosure. Its sensitivity is rated at 96 dB at 1 W/1 m, and its frame is made of die-cast aluminum.
