Algam Lighting DMX248R Splitter - Rack-Mountable 2 x 4-Channel DMX Splitter
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
What you need to know
What you need to know
- Two independent splitters in a 1U rack unit: two DMX inputs each feed four outputs, providing eight distribution lines.
- Isolated and amplified distribution: the inputs and outputs are electrically isolated, with a dedicated amplifier for each output.
- Flexible configuration: distribute two separate universes or a single universe across all eight outputs by connecting the Thru 1 output to input 2.
- Designed for control-room integration: 3-pin XLR connectors, PowerCon power supply and control indicators in a rack-mountable metal chassis.
Manufacturer Information
Algam Lighting
https://www.algam.net
contact@algam.net
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
Two DMX Splitters in a Single Rack Space
The Algam Lighting SPLITTER-DMX248R centralizes lighting signal distribution without requiring multiple boxes. Its design combines two independent four-output sections in a 19-inch, 1U-high rack format. It is therefore suited to installations that need to distribute two DMX universes while maintaining a compact setup in a rack or flight case.
The four lines of each section correspond to distribution lines, not a limitation to four control channels. Each input sends its universe to the four associated outputs. This configuration makes it possible to structure the lighting network according to the layout of the equipment, rather than imposing a single long chain of fixtures.
For Lighting Service Providers and Fixed Installations
This rack-mountable DMX splitter is designed for service providers, stage managers and technicians who want to organize their cabling by zones, trusses or fixture groups. Each output can feed a line supporting up to 32 devices. Distributing the lines makes the network easier to understand and helps reduce cable detours between different areas of the stage.
Its format is suitable for touring as well as performance venues, theatres, places of worship and educational establishments. In fixed installations, the separate outputs make it easier to identify the different zones. In a mobile rack, the distribution connections at the rear help maintain an orderly cable layout, while the controls and indicators remain accessible from the front.
Isolated, Controllable and Scalable Distribution
Two Separate Universes or Eight Outputs for a Single Universe
Each input features four amplified outputs and one parallel Thru output. You can therefore run two universes in parallel or connect the Thru output of the first section to the second input to distribute a single universe across all eight outputs. The Thru outputs can also be used to extend the lines to other splitters or devices.
Electrical Isolation and Amplification on Each Output
All inputs and outputs are electrically isolated. Each output also has its own amplifier to regenerate the distributed signal. This design limits the impact of a fault on one branch, helping protect the other outputs and the console. It provides useful separation when fixtures are distributed across several areas of the installation.
Front-Panel Visual Monitoring
One signal LED per output, along with a DMX LED and a power LED for each input, lets you quickly check the status of the distribution. Two 120-ohm termination switches replace termination plugs when the Thru outputs are not in use. The inputs, Thru outputs, switches and indicators are all grouped on the front panel.
The eight locking DMX outputs and the PowerCon power inlet are located at the rear of the unit. The internal power supply accepts a voltage range of 100 to 240 V and features an on/off switch. The supplied PowerCon cable completes the package, ready to be integrated into a technical rack without an external power supply.
Technical specifications
| Format | Rackable | Cooling | Passive |
| Construction | Metal | Index of protection (IP) | IP20 |
| DMX Input | 2 XLR | Mains connection | Powercon |
| DMX Output | 8 XLR (2 x 4) Thru : 2 XLR | Weight | 2.01 kg |
| Color | Black | Dimensions (mm) | 482 x 160 x 44 |
| Function | independent dual DMX splitter | Output indicators | 1 signal LED per output |
| Architecture | 2 inputs to 2 blocks of 4 outputs, with 2 parallel Thru outputs | Input indicators | 1 DMX LED and 1 power LED per input |
| Distributed universes | 2 independent universes or 1 universe across 8 outputs by linking Thru output 1 to input 2 | Power supply | internal, 100–240 V |
| Capacity per line | up to 32 devices | Power connector | PowerCon inlet on the rear panel |
| Electrical isolation | isolated inputs and outputs | Switch | on/off |
| Amplification | dedicated amplifier per output | Power consumption | 10 W |
| DMX inputs | 2 male 3-pin XLR connectors on the front panel | Enclosure | metal |
| Thru outputs | 2 female 3-pin DMX XLR connectors on the front panel | Height | 1U |
| DMX outputs | 8 locking female 3-pin XLR connectors, arranged in 2 blocks of 4 on the rear panel | Supplied cable | PowerCon power cable |
| Termination | 2 120-ohm switches on the front panel | ||



