Algam Lighting DMX4 Splitter - 4-channel DMX splitter
Estimated Shipping Widget will be displayed here!
- This item is covered for 3 years
What you need to know
What you need to know
- One input, four independent lines: distribute your DMX signal to four outputs, each supporting up to 32 devices.
- Optically isolated distribution: each output has its own amplifier to regenerate the signal and limit the impact of an incident on one line.
- Parallel Thru output: add other splitters to your setup, with a switchable 120-ohm termination on the front panel.
- Stage-ready format: metal housing, integrated power supply with PowerCon socket, and suspension bracket included.
Manufacturer Information
Algam Lighting
https://www.algam.net
contact@algam.net
------------------------
Safety manager:
Algam SAS
Email: contact@algam.net
Address:
For organising DMX on stage or in permanent installations
The Algam Lighting SPLITTER-DMX4 DMX splitter is designed for lighting technicians, service providers and venues equipped with several groups of fixtures. On a stage, in a performance venue or in an educational establishment, it distributes the control signal without making the entire installation dependent on a single cabling chain.
You can therefore organise your lines by zone, truss or fixture group. Instead of connecting all the fixtures in succession from one area to another, you have four separate outputs from a single point. This distribution reduces cable detours and makes the DMX routing easier to follow during setup or maintenance.
Four amplified outputs for more reliable distribution
One signal distributed across four lines
The SPLITTER-DMX4 duplicates the signal received from your console to its four outputs. Each one starts a new DMX line capable of accommodating up to 32 devices. The same signal is distributed across several branches: the splitter organises the control network without increasing the number of available DMX universes.
This architecture allows the cabling to be adapted to the actual arrangement of the fixtures. One line can serve a front truss, another the backlights and a third the floor-mounted fixtures. If your setup does not use all four outputs, the unused outputs do not require termination.
Optical isolation and visual monitoring
Each output is optically isolated and has a dedicated amplifier. The signal is regenerated at each output, while an electrical incident on one line is isolated from the other outputs and the console. This separation helps preserve the operation of the rest of the distribution when a branch encounters a problem.
For quick installation checks, a signal LED for each output complements the DMX input and power indicators. You can visually check for the presence of the signal at the various outputs without first having to follow each cable to the connected devices.
A Thru output and a design made for the field
The parallel Thru output allows several splitters to be chained when the setup requires more distribution points. When it is not in use, the 120-ohm termination switch on the front panel replaces the termination plug on this link. This allows you to adapt the connections to the layout of your installation.
The internal power supply accepts a voltage of 100 to 240 V at 50/60 Hz, eliminating the need for an external power adapter. The PowerCON socket and the on/off switch group the power functions on the housing. DMX connections use locking 3-pin XLR connectors.
With its dimensions of 247 x 116 x 39 mm and its weight of 891 g, the metal housing fits in a control booth or on a truss. The suspension bracket and its three screws are supplied, as is the power cord. An attachment point is provided for a safety sling; the mounting hook is available as an option.
Technical specifications
| Construction | Metal | Cooling | Passive |
| Connectors | powerCon, 3-pin XLR | Index of protection (IP) | IP20 |
| DMX Input | 3-pin XLR (DMX) | Mains connection | Powercon |
| DMX Output | 3-pin XLR (DMX) 3 pin Thru parallel output | Weight | 890 g |
| Color | Black | Dimensions (mm) | 247 x 116 x 39 |
| Type | 4-way DMX splitter | Power indicator | 1 LED |
| Brand | Algam Lighting | Power supply | internal, 100–240 V, 50/60 Hz |
| Model | SPLITTER-DMX4 | Power connector | PowerCon inlet |
| DMX outputs | 4 independent outputs | Power control | on/off switch |
| Parallel output | 1 Thru | Power consumption | 6 W |
| Capacity | up to 32 devices per line | Housing | metal |
| Isolation | optically isolated inputs and outputs | Dimensions | 247 x 116 x 39 mm |
| Amplification | dedicated amplifier per output | Suspension | bracket supplied with 3 screws |
| DMX connectors | locking 3-pin XLR | Safety attachment point | attachment point for a safety cable |
| Thru termination | 120-ohm switch on the front panel | Mounting hook | optional |
| Output indicators | 1 signal LED per output | Mounting | suspension bracket with 3 screws |
| Input indicator | 1 DMX LED | ||



