Sparedrum L18SDTT - SNARE DRUM / TOM LUG - 38MM (X1)
Estimated Shipping Widget will be displayed here!
Essential Information About the Snare Drum / Tom Shell
Essential Information About the Snare Drum / Tom Shell
- Brass shell with chrome finish for excellent durability and a look matching most hardware.
- 38 mm center-to-center spacing and 6 mm drilling : ideal size for many snare drum and tom shells.
- Standard 12-24 tension rod threading (7/32 inch diameter): compatible with a wide range of "standard" tension rods.
- Included insulating rubber to limit unwanted vibrations and protect the shell.
Manufacturer Information
Sparedrum
https://www.sparedrum.com
info@sparedrum.com
------------------------
Safety manager:
VBV International
Email: info@vbvinternational.com
Address:
Historical Context and Positioning in the Range
This shell is one of the essential hardware parts for the maintenance and refurbishment of an acoustic drum kit. Its size and threading standards make it a practical solution to replace a worn, damaged, or oxidized shell while maintaining common compatibility with existing tension rods and hoops.
Who This Drum / Component Is For
It is intended for beginner to advanced drummers, backline technicians, and anyone looking to secure a snare drum or tom shell. Ideal for workshops as well as tours, for quick repairs, restoration projects, or custom builds.
Technical specifications
| Number of holes | 1 | Color | Grey |
| Use | Snaredrum | Finishing | Chrome |
| Material | brass | ||
You will also like
Sparedrum
TL12D89 - TUBE LUG - 89MM - DOUBLE ENDED (X1)
Sparedrum
DC7RA - HSFB23 DRUM CLAW HOOK - RAW BRASS (X2)
Sparedrum
TL12D51 - TUBE LUG - 51MM - DOUBLE ENDED (X1)
Sparedrum
L23Sdtt Snare Drum Tom Lug 39Mm X1
Sparedrum
L21SD - SNARE DRUM LUG - 65MM (X1)
Drum N Base
HP180 - BASS DRUM HOOP PROTECTION - RUBBER
Tama
QC8 - QUICK SET TILTER CYMBAL
Danmar
TRW20B - NYLON TENSION ROD WASHERS - BLACK (X20)
Questions frequently asked
What center-to-center distance is needed to replace a snare shell lug?
The center-to-center distance is 38 mm. The required holes in the shell have a diameter of 6 mm.
Does the Sparedrum L18SDTT use standard tension rods?
The lug thread follows the 12-24 standard, with a diameter of 7/32 inch. This must match the thread of the tension rods already used on the shell.
What screws are needed to mount this lug?
Mounting to the shell requires M4 screws, which are not included. The lug has a single mounting hole. An insulating washer is provided to stabilize the hardware and protect the finish when tightened.
Is this lug suitable for a tom?
Its size is intended for snare drums or toms, provided there is a match between the 38 mm center-to-center distance, 6 mm hole diameter, and M4 screws.
What is the material and finish of this lug?
It is made of brass with a gray chrome finish.
