Sparedrum TL1D89-BK - TUBE LUG BLACK - 89MM - DOUBLE ENDED (X1)
Estimated Shipping Widget will be displayed here!
Essential Information About the Tube Lug for Snare Drum and Tom
Essential Information About the Tube Lug for Snare Drum and Tom
- 2-point lug shell for tension rods, ideal for replacement or restoration
- Black Nickel Plating finish on a brass base for a sleek and durable look
- Standard mounting : 89 mm center-to-center spacing, 6 mm drilling, M4 screws
- Improved isolation : insulating rubber included to limit vibrations and unwanted noise
Manufacturer Information
Sparedrum
https://www.sparedrum.com
info@sparedrum.com
------------------------
Safety manager:
VBV International
Email: info@vbvinternational.com
Address:
Historical Context and Positioning in the Range
This tube lug is a hardware piece designed for the maintenance and refurbishment of snare drums and toms. It fits within the standards of "vintage/standard type" drum hardware, with a common format that facilitates replacements without altering the shell's aesthetics.
Intended Users for This Drum/Equipment
It is suitable for drummers from beginners to advanced, backline technicians, and DIY enthusiasts who want to enhance the reliability of an acoustic drum set. Perfect for rehearsal and stage kits whenever stable tension and clean mounting on snare or tom are desired.
Features and Innovations
The lug accepts tension rods with a standard #12-24 thread and is fixed using M4 mounting screws (not included). The insulating rubber helps preserve the shell and reduce vibration transmission to the hardware.
Sound Characteristics
By maintaining consistent tension and limiting certain mechanical vibrations thanks to the isolator, this lug contributes to more stable tuning retention. The result is a more controlled drumhead response, particularly useful on snare drums and toms tuned precisely.
Technical specifications
| Application | snare drum and tom | Mounting screw type | M4 |
| Type | tube lug, two attachment points for tension rods | Mounting screws | not included |
| Tension rod threading | standard #12-24 (7/32 inch diameter) | Black finish | Black Nickel Plating |
| Center-to-center spacing | 89 mm | Insulating rubber | included |
| Drill hole diameter | 6 mm | ||
You will also like
Sparedrum
TL12D89 - TUBE LUG - 89MM - DOUBLE ENDED (X1)
Sparedrum
DC7RA - HSFB23 DRUM CLAW HOOK - RAW BRASS (X2)
Sparedrum
L24SD-BR - Snare Drum Lug - Single-Point Gold (x1)
Sparedrum
L18SDTT - SNARE DRUM / TOM LUG - 38MM (X1)
Sparedrum
L24SD-BK - Snare Drum Lug - Single Drilling Point Black (x1)
Drum N Base
HP180 - BASS DRUM HOOP PROTECTION - RUBBER
Ahead
AWFJB PACK CYMBAL BLACK FELTS X10
Gibraltar
SC-PC07 LARGE RUBBER FEET
Questions frequently asked
Is this tube lug compatible with #12-24 tension rods?
The accepted threading is the standard #12-24, corresponding to a diameter of 7/32 inch.
What center-to-center measurement should be planned to mount this lug on a tom?
The center-to-center distance between mounting holes is 89 mm. The required drill holes have a diameter of 6 mm.
What screws are needed to install the Sparedrum TL1D89-Bk?
Installation requires M4 screws. Mounting screws are not included with the lug.
Is the 89 mm lug suitable for a snare drum?
This part is designed for both snare drums and toms. Its two-point mounting design receives tension rods on each side of the tube.
Is an isolator provided with this black lug?
A rubber isolator is included to protect the shell and limit vibration transmission to the hardware. The finish is black nickel plating. This setup helps maintain even tensioning.
