B&C Speakers 10 NDL 64
Estimated Shipping Widget will be displayed here!
Couldn't load pickup availability
Information
Information
Manufacturer Information
B&C Speakers
------------------------
Safety manager:
MSC Distribution
Email: infos@msc-distribution.com
Address:
A 10" B&C Focused on Efficiency and Compactness
The B&C 10NDL64 fits within the brand's "pro audio" approach: offering a woofer/midrange speaker capable of delivering high levels with fast response, while limiting weight thanks to neodymium. Its 10" format naturally places it in the compact solutions category, where a balance is sought between bass depth, low-midrange projection, and ease of integration into a speaker enclosure.
Who Is It For and What Are Its Uses?
This speaker is particularly suited for speaker manufacturers, integrators, sound technicians, and DIY enthusiasts looking for an efficient 10" driver for a full-range head, a satellite with subwoofer, a punchy stage monitor, or a compact sound reinforcement speaker. Its frequency response up to 3kHz facilitates use in the low-midrange, especially in two-way configurations with a compression driver and horn, or in multi-way setups depending on the chosen crossover.
Design and Key Points for Performance
The 10NDL64 combines a neodymium motor and a diaphragm architecture designed to maintain good control at high levels. Its dual-roll suspension contributes to the stability of the moving assembly, while the single spider preserves a direct and responsive behavior, appreciated for attack precision and clarity in the low-midrange.
64mm Voice Coil: Power Handling and Consistency
The 64mm (2.5") voice coil with aluminum wire is sized to handle the rated power and limit heat buildup under sustained use conditions. The result is a more consistent performance, useful when the speaker must remain stable during long performances.
Tuning and Enclosure: A Clear Basis for Cabinet Design
To optimize the balance between bass extension and control, a recommended enclosure volume of 26 liters with a tuning frequency of 62Hz is provided. This is a valuable reference point to start a cabinet project: it yields a compact solution consistent with the 10" driver's "efficiency/transport" spirit, while aiming for a clean and usable response in the lower spectrum.
Technical specifications
| Rackable | No |
| Category | sound reinforcement accessory |
| Type | Speakers |
| Model | B&C 10NDL64 |
| Nominal Diameter | 10" (25cm) |
| Power | 500W AES |
| Impedance | 8 Ohms |
| Sensitivity | 97dB (1W/1m) |
| Frequency Response | 50Hz - 3kHz |
| Fs | 56Hz |
| Qts | 0.26 |
| Xmax | 6.0mm |
| Voice Coil | 2.5" (64mm) |
| Voice Coil Wire | Aluminum |
| Magnet | Neodymium |
| Suspension | Dual-roll |
| Cone | Exponential, waterproof treatment front/back |
| Spider | Single |
| Total Diameter | 261mm |
| Height | 113mm |
| Weight | 2.9kg |
| Recommended Volume | 26 liters |
| Recommended Tuning | 62Hz |
Questions frequently asked
Is the B&C 10NDL64 suitable for a two-way speaker?
Its specified frequency response of 50 Hz to 3 kHz allows for use in the low-mid range with a compression driver and horn, depending on the chosen crossover. The nominal impedance is 8 ohms.
What AES power rating does this 10-inch loudspeaker support?
The specified power handling is 500 W AES. The 64 mm voice coil uses aluminum wire to support high-level operation.
What enclosure volume should be planned for this B&C 10-inch?
A 26-liter enclosure tuned to 62 Hz is recommended. This setup is suitable for designing a compact PA speaker.
Can this loudspeaker be used as a stage monitor?
The 10-inch size, 97 dB sensitivity at 1 W/1 m, and 6 mm Xmax make it appropriate for a punchy stage monitor application. The dual-roll surround contributes to the stability of the moving assembly.
What are the weight and dimensions of the 10NDL64?
The unit has a total diameter of 261 mm, a height of 113 mm, and weighs 2.9 kg thanks to its neodymium magnet motor.



